Thanks! ...   07-03-2025 03:47 pm

Off by a bit. I need to flip the exhaust and line up 110 to 110. If I back off the crank by 90 degrees ...   07-01-2025 11:53 pm

Cam pulleys ...   07-01-2025 08:22 pm

Crank pulley ...   07-01-2025 08:21 pm

Still trying to post pics ...   06-30-2025 04:17 pm

Here are some pics. I hope I am not overstepping by asking for help. ...   06-30-2025 04:14 pm

I thought I had posted pics, apparently they did not go through. Is there a trick to it? ...   06-30-2025 12:24 am

Okay, here is where things are now. Crank pulley is beyond TDC alignment. Intake cam is aligned at 110 IN. exhaust cam pulley is between 110 IN ...   06-29-2025 11:14 pm

Sorry, I was in a bit of a panic as I have a limited amount of time right now to work on the car. I have ...   06-29-2025 09:47 pm

Vance, thank you so much! I do have a shop manual,but didn't find it helpful with some of the issues I was having. Your information ...   06-29-2025 03:22 am

I'm changing the timing belt while I'm installing the Mikuni carbs. Is there a detailed procedure on the site for this process? I may ...   06-28-2025 07:53 pm

I am certain there are other problems, just more involved on to carb adjustment, fuel delivery etc. I was mostly concerned with the possibility ...   08-30-2021 09:49 pm

Finally getting back to the timing project. The PO set the cams to 110 IN and 115 OUT, saying that was what the shop manual specified. ...   08-30-2021 09:01 pm

That would be a great help. I've got my grandson here now so no more work today. I may reach out in a day or ...   07-31-2021 08:32 pm

Tom, I posted my reply before I saw your post. That is great info, I greatly appreciate it I will order a Burroughs tension gauge ...   07-31-2021 06:47 pm

Just so I'm clear - I should be able to back off the timing belt tensioner, remove the belt, remove the exhaust pulley and relocate ...   07-31-2021 06:40 pm

Thanks for the info Bruce - just what the doctor ordered. The vacuum line is plugged, but the steel ball is a much better solution. ...   07-31-2021 12:23 am

Hi all - newbie here, after many years of lusting after a JH, I finally found the right car at the right price. A '74, ...   07-30-2021 10:34 pm