If you’re going to use an equivalent, make sure it’s from a reputable manufacturer. Stay away from any “white box” product. You get ...   10-01-2024 12:07 am

I don’t think that is the case. They already had a drive line that would have to be ordered either longer or shorter to ...   07-28-2024 08:18 pm

The center support bearing on my drive line is shot and needs to be replaced. A common fix is to replace the original with ...   07-28-2024 01:37 pm

dig, You said you were running a standard ticking SU fuel pump. Have you checked that you are delivering fuel at 2.5psi? Any more ...   05-14-2024 01:12 am

Yes it is. Plan for over the winter is to feed it into the catch tank. ...   12-11-2023 10:39 pm

I have dellortos and ended up adding a small catch tank next to windshield washer reservoir. Don ...   12-11-2023 10:11 pm

I bought a new fuel tank from Martin Robey this past summer. It arrived three days after ordering it. It was well packaged ...   01-30-2023 04:37 pm

Better to be safe than sorry. Although the engine came off idle smoothly without any help, there was no pinging, and plugs looked good, ...   08-29-2022 05:22 pm

I’m not complaining and this probably falls under, if it ain’t broke, don’t fix it. I recently sorted out some running issues on my JH5 (#20092) ...   08-11-2022 08:40 pm

Noomg, We’ve all done things to keep a car on the road in ways that may not be correct, but as you implied, you do what ...   05-31-2022 04:33 pm

I’ve had my car (20092) for over a year and other than some initial problems, the car has run great. I thought I found ...   05-31-2022 12:19 am

I was able to pull JH out and look at the hood and installing the struts. I originally replaced the original support with a ...   03-16-2022 11:57 pm

Paul, The carbs are the last things to adjust. Yes, you have to make sure they are set up properly and don’t leak fuel and ...   02-16-2022 05:24 pm

Sorry. Strongarm, not strongman. ...   02-07-2022 07:29 pm

Thanks, that is what I was looking for. Unfortunately I could not use the PepBoys info, but the article information crossed to a Strongman ...   02-07-2022 07:22 pm

Sitting and looking out at the snow, all I can do is start to plan this year’s projects. I’ve already planned a few upgrades, ...   02-06-2022 03:06 pm

Another benefit of the hi torque starters is the extra room they give you for your oil change. It makes removing the oil filter ...   01-11-2022 11:30 pm

Vin 20092 Don Kuzma Green with tan interior and roll bar. No rust. VG condition No history but discovered it had stroked crank after I got ...   11-29-2021 09:22 pm

Fuel pressure seems high. ...   11-28-2021 03:21 am

Does anyone know how they numbered the cars at the end of 1974? It doesn't appear to be sequential. The one currently on ebay ...   07-25-2021 08:28 pm

Well everything is working great and have the carbs dialed in. I dis-assemnled the cards and recleaned all of the components and passages. Reassembled them, ...   06-04-2021 01:36 am

I have DHLA 45 E carbs. The DHLA 45 is cast into the cover and E is stamped after the cast number. 45mm throat, 36mm choke Tag ...   04-26-2021 12:23 am

I recently took delivery of my new JH5 (#20092). I have spent the last couple of weeks getting familiar with it and making it ...   04-25-2021 08:59 pm

Noomg, Thats the vin number i need to get exposed. That helps me locate where it should be located. Any photos of the plate ...   04-13-2021 02:46 am

Noomg, Thats the vin number i need to get exposed. That helps me locate where it should be located. Any photos of the plate ...   04-13-2021 02:46 am

I do have a question. Somewhere along the line a dash cover was installed and the VIN number is not visible. Where is the ...   04-12-2021 05:06 pm

I purchased the green car on BaT. When I got the car home, it was as good as in the photos and description. I am ...   04-12-2021 01:43 pm