That's a capacitive discharge ignition (CDI) coil replacement unit. They will produce a hotter spark. If it's not causing any problems, I'd leave ...   03-02-2021 10:29 pm

I sent you a PM. ...   02-02-2021 11:58 pm

Sounds like its flooded. Residual fuel pressure getting past the needle and seats, maybe? ...   11-17-2020 11:51 pm

Thanks. I'm thinking that simple ball and spring regulator is long gone as well. I should probably pick up an aftermarket one. ...   09-20-2020 12:40 am

It just seemed odd that they didn't leak and then both did. I hope the new needle and seat assemblies do the trick, but that brings ...   09-19-2020 10:50 pm

I haven't had the chance to drive the car much since I got it. It pretty much ran like crap and I knew I ...   09-19-2020 05:09 pm

Well, I certainly don't need more the one way to adjust the mixture. Plastic it is. Thank you! ...   09-14-2020 08:19 pm

I'm replacing the TR6 175CDs on my car with the proper JH carbs. There are many minor differences in the carbs. One is ...   09-14-2020 07:12 pm

I just checked my door. It's stamped 12-28-74. The database I referenced above is obviously wrong. The date is still confusing, though. It's ...   08-31-2020 09:09 pm

Nope. None of that stuff. ...   08-31-2020 02:28 am

Hmm. Mine is a '74, but it was completed 1-31-75 (according to some database I don't have access to). S/N 19839. ...   08-30-2020 10:55 pm

And down the rabbit hole you go. I don't think there is any way to check for fluid in the booster without removing it. When ...   05-20-2020 06:22 pm

ATF = Automatic Transmission Fluid. ...   02-08-2020 05:12 pm

Moss Motors sells this stuff. It might be repackaged ATF. I have no idea. Click on the pic for the link. https://mossmotors.com/media/catalog/product/cache/1/image/1800x/040ec09b1e35df139433887a97daa66f/2/2/220-225_1.jpg ...   01-11-2020 03:03 pm

Thanks, Bruce. Where are these located? ...   11-25-2019 10:54 pm

So it seems as though my '74 car had a '73 W/H installed for some reason. That's easy. It was on the shelf. ...   10-28-2019 08:28 pm

Thanks for the offer. Once I mount up the carbs, I may take you up on it to check out the vacuum connections and ...   10-15-2019 05:09 pm

I will rebuild the JH carbs. I didn't want to rebuild the ones that came off a TR6 or something. I wanted the ...   10-13-2019 07:20 pm

I picked up a set of proper JH carbs. I didn't feel like rebuilding the ones on the car. ...   10-11-2019 06:05 pm

I've been trying to figure out why someone would trade out the Strombergs on my car. Maybe they were doing it just to ...   10-10-2019 05:47 pm

Thanks, I'll check the battery box. ...   10-09-2019 02:36 pm

I just bought a 74 and recently discovered that the floors under the carpet are wet (and rusty, of course). The documents in the ...   10-09-2019 05:07 am

Thanks, Tim. Dellortos would be nice, but they do not appear to be readily available. Well, inexpensive ones anyway. ...   10-03-2019 10:24 pm

Thanks, Bruce. I ordered a book. I just didn't know what the bypass valves were for. ...   10-02-2019 03:47 pm

It sounds like people are purposely deactivating the bypass valves. Why? ...   10-02-2019 02:34 pm

I grabbed an image off eBay: https://imagizer.imageshack.com/img923/7004/D6ZMqU.jpg I do not have the black hose in the picture, nor do I have that cylindrical device on the back ...   10-01-2019 11:11 pm

Thanks for the reply. I do not have an additional hose going between the carbs. They are 175 CDs, but probably not the ...   10-01-2019 10:52 pm

I just picked up 19839 and am trying to sort it out. The Strombergs need to be rebuilt (leaking oil and I imagine other ...   10-01-2019 09:12 pm