Thanks for your input but as I stated previously I'm on hiatus while I decide if I want another "learning experience" with this car I ...   05-10-2016 02:39 pm

the rest of the car is in good shape. The body is straight with very little rust I just put shocks tires and clutch into ...   05-03-2016 05:04 pm

Thanks I really appreciate your help > I think it's time for this one to finds a new home as I really don't have anywhere ...   05-01-2016 09:27 pm

That was my original suspicion because I had a high idle when my brake booster was shot . The spitting back through the carbs is ...   05-01-2016 07:47 pm

Yes those are the only marks on the camwheels and the camshafts are positioned correctly ...   05-01-2016 07:22 pm

Thanks Brett I've done all of the above and have not achieved the result I expected ...   05-01-2016 07:20 pm

I really appreciate your help on this ...   05-01-2016 07:18 pm

I have done all this the car will run but not well. When the cam covers are removed and the engine is at #1TDC. the ...   05-01-2016 07:17 pm

This is the part that is baffling because I have done this several time before and never had anything like this happen ...   05-01-2016 06:42 pm

They are lined up intake to exhaust 115 to 115 ...   05-01-2016 06:41 pm

I didn't have to flip the sprocket over to change the timing the marks are as your picture shows on both sprockets ...   05-01-2016 03:58 pm

Yes and the marks line up, there are no dots on the cam wheels as the have probably been cleaned repeatedly and been erased over ...   05-01-2016 03:20 pm

The cams line up with the correct firing order, everything is where it is supposed to be which is why I cant figure this out ...   05-01-2016 03:01 pm

What do you need for them I'm in Huntington Beach. The car us in Winchester at my brother's house ...   05-01-2016 02:16 pm

No compression occurs at 110 timing the car runs at115 ...   05-01-2016 02:14 pm

I'd love to but cant afford the replacement Dellortos ...   05-01-2016 12:32 am

Nothing came in contact as far as valves and pistons, I've been down that road, the bearing in the tensioner broke up and the engine ...   04-30-2016 11:51 pm

I have a 75? (build date Dec.12/74) five speed which I have recently replaced the timing belt and tensioner, the tensioner quit after 41 years. ...   04-30-2016 08:58 pm