It is dead until I tap it. Hopefully I will get to it this weekend. Thanks ...   06-22-2021 12:30 pm

I actually have to tap it to make it kinda work, but cleaning sounds like a good start. ...   06-19-2021 07:29 pm

Thanks. Jay ...   06-19-2021 05:13 pm

This is an older electronic ignition and I can't find any info on how to adjust or diode the beast to read correctly. Has ...   06-19-2021 02:11 pm

I looked at the car also and saw the rust on the door jam which is an odd place to have it. The hood ...   11-23-2019 04:22 pm

"That is correct, sir". I may need a bigger van. ...   06-02-2018 12:48 pm

Kinda figured that. Thanks. I'll look around. ...   05-31-2018 05:45 pm

Yup, Brett was correct and the webbing is collapsed but all there. Does anyone know if can be straightened and still kinda work? ...   05-31-2018 02:59 pm

No flopping at the wheel that I can remember, but I have not tried that test yet. ...   05-30-2018 02:44 pm

No flopping at the wheel that I can remember, but I have not tried that test yet. ...   05-30-2018 02:43 pm

My first thought also but the whole shaft moves with the steering wheel. We shall see. ...   05-30-2018 02:04 pm

Thanks. I am dissecting the beast today. and will keep you informed. ...   05-30-2018 12:52 pm

I know the beast was hit and maybe bottomed onto something due to repaired damage but I can push the shaft back into the firewall ...   05-29-2018 05:07 pm

I am finishing my 73 for road use and then I will start on my 76 GT. It is a mess but solid body. ...   03-26-2017 01:56 am

I also have a paint question regarding the 2 yellows on the latest tech tip. My 73 JH is ready for paint and I ...   10-03-2016 07:09 pm

Being new to the JH family I have a question about the anti-sway bar bushing placement on my machine as compared to others I have ...   01-07-2015 05:20 pm

It appears that 13911 Barnfind spent a little time airborne and kinda bent the rear bushings back up into the frame a little. I ...   10-16-2014 04:50 pm

I don't know if this is the place to put my info, but here we go. 1973 Mk2. Engine # B7308349, body # ...   09-19-2014 11:29 pm

Thanks. Jay ...   09-02-2014 01:22 pm

I finally got all my numbers everybody. Body 13911 Engine B 7308349 Webers 40 DCUOE 2 #66 Cam timing and ignition are good. Fuel ...   09-01-2014 06:43 pm

I have no info on the car. Last titled in 09. 48K. I assume nothing is right, or good, or replaced on ...   08-22-2014 01:03 pm

Plymouth. Neighbor. ...   08-22-2014 12:42 am

Something to think about. HS2? ...   08-22-2014 12:02 am

I am sure a carb rebuild is in my future so it may be a good purchase. Thanks ...   08-20-2014 12:48 pm

Thanks. I am planning a compression test and oil fog if needed to start zeroing on issue. Later part (19 years) of it's ...   08-19-2014 08:42 pm

Thanks again. USA. Minnesota. I am suspicious of a compression problem from exhaust notes, however. ...   08-19-2014 04:59 pm

Thanks. It is gummy. No Points a Pirahana electronic is installed but I will pull it apart farther in a day or so to ...   08-19-2014 04:16 pm

I was afraid of that. Anybody ever change them to SUs? Yah, right. It off to Ebay for me. thanks ...   08-19-2014 03:27 pm

I am a new owner of a JH so please be patient. I am looking for direction on the what is the best process ...   08-18-2014 02:59 pm