The link shows a black RHD Mk I. VIN 13921 is a mustard green LHD Mk II. ...   07-05-2018 01:38 pm

Still looking for 13921... ...   09-08-2016 06:46 pm

This undoubtedly is an old question. but how does one get the distributor drive shaft to engage? I can get the distributor to "snap" back into ...   09-10-2014 01:05 am

The word is that 13921 was owned by Michael Mettler in California from 2004 to approximately 2006. I have not had any success contacting Mr. ...   08-28-2014 08:21 pm

Thank you, Esprit2. It's successfully back together. Amazing how much better in runs when the intake is not two cogs retarded, as the PO had ...   08-21-2014 02:14 pm

I'm reinstalling the timing belt and concerned about the setting of the ignition pulley. Can anyone tell me if this diagram shows the mark correctly ...   08-10-2014 11:05 pm

Evidently this is a phenomenon known as intake reversion, and is some of the cylinder contents flowing back the intake line (see, for example, http://www.circletrack.com/enginetech/ctrp_1008_intake_reversion/ It ...   08-06-2014 06:34 pm

I started down the helicoil road to fix the holes, to discover that you can't do it while the cam towers are on the car. ...   08-06-2014 01:18 pm

In fact a second one let go at about 4 ft-lbs, so all on them it is. The question is whether the back two on ...   08-04-2014 04:55 pm

Was just cleaning out the bolt holes prior to fitting the JHPS cam cover gaskets, and I find the the bottom center hole for the ...   08-02-2014 04:14 am

Forty years back we bought a Mk II (not Tupperware console), and it came with the rubber insert. My impression is that the metal was ...   07-30-2014 02:06 pm

Hello, Answerman; we seem to be trading quite a few messages this week. Can you tell me more about the condition of your top, and/or ...   07-29-2014 01:13 pm

Hi, Dave... Yes, I'd like to see the pics. Thanks & best regards, Kevin ...   07-29-2014 02:24 am

Curious if the hardtop sold or is still around. ...   07-29-2014 02:12 am

Thanks, that's the info I needed on the breather. Think I may try to put together the parts to reinstall the factory intake setup. ...   07-29-2014 01:51 am

While under the bonnet adjusting the Strombergs I revved the engine and saw what appeared to be a light white mist coming OUT of the ...   07-27-2014 02:58 am

Chris, if you still have the a/c documents, would you please e-mail a copy to me? These Florida summers get mighty hot... Thanks! ...   07-21-2014 07:02 pm

Greg did indeed remember the 2004 buyer, who resold the car in 2006. I've sent that fellow a letter to see if he can recall ...   07-21-2014 06:34 pm

My new-to-me JH has a problem that has stumped me. The seat mounting is loose, but the seat will not tip forward to allow access ...   07-21-2014 02:11 am

Yes; he was able to give the (then) owner's name and e-mail as if 2004. Unfortunately, the e-mail address does not seem to connect in ...   07-16-2014 11:48 pm

By the way, #13921 was known to be in California and in good original shape as of 2004. Keep a lookout for it, eh? ...   07-16-2014 09:51 pm

As of 9 July 2014 #14882 is in good operating condition in Sarasota, Florida. Resprayed in the original tangerine color by the previous owner in ...   07-15-2014 12:39 am

I'm interested in finding Jensen Healey Mk II # 13921. My father was the original owner, and I learned to drive in this car. When ...   07-14-2014 11:13 pm

14882 in good running condition in Sarasota, FL since 9 July 2014. Reprinted in the original tangerine color with black interior. Haven't made out the ...   07-14-2014 11:04 pm