Just a thought, it might be worth your time to pick up a 1/4" or 3/8" drive in/lb torque wrench if you don't have one ...   08-05-2014 11:06 am

Just my two cents here... My older brother has been a body man for over thirty years and a while back we had a discussion about ...   01-18-2014 07:59 pm

There are a several factors involved with setting the correct piston to cylinder wall clearance, but the most important piece of information comes from the ...   11-17-2013 06:26 am

Just adding my 2 cents here, but nearly every factory alloy wheel (and all factory steel wheels) I have ever seen has been a hub-centric ...   09-20-2013 06:52 am

anecdotal experiences of mine... A friend bought a new pickup and it definitely had the empty oil can sound from the bed until he had the ...   09-01-2013 09:00 am

Okay I did a comparison and going by the reservoir shape it looks like mine was already swapped at some point with a TR-6 master ...   08-23-2013 11:12 pm

According to the research I've done on the web the 1969-1976 Triumph TR-6 master cylinder is a bolt on replacement for the original Jensen Healey ...   08-20-2013 07:38 am

I'll leave out the pedestrian vehicles. 1978 : 1969 Plymouth Roadrunner 383/auto. Was a one owner car (previous owner was 87 when I bought it) amazing ...   08-19-2013 08:41 am

I guess this is my introductory post. I'm now the owner of the 1974 #14289, it's still yellow, the interior is somewhere between rough and ...   08-19-2013 08:03 am