| ||||
Moderated by: Greg Fletcher |
|
Front spoiler | Rating: |
Author | Post |
---|
Posted: 04-30-2012 07:54 pm |
|
1st Post |
George Member
|
Hello. I put a front spoiler on my JH5, really helped with cooling. It looked good, however, it was kind of big. Now i need something for my GT. Is anyone using something a little smaller, either aftermarket or home made? I guess i could buy a Club Store one and cut it down, but i am really just looking for something basic. Any pics would be very helpful. thanks george
|
||||||||||||||
|
Posted: 05-20-2012 09:27 pm |
|
2nd Post |
Jensenman Member
|
I made an aluminum 'extension' for the stock lower radiator opening which channels air into the radiator. It's not pretty but it really helps with the cooling, I painted it black so it wouldn't be so easy to see. I'll see if I can get a pic.
|
|||||||||||||
|
Posted: 05-20-2012 11:45 pm |
|
3rd Post |
George Member
|
Thanks. That's what I ended up doing as well, painted black too. It only sticks out about 4 inches, but is well secured under the front valance. i hope it helps.
|
||||||||||||||
|
Posted: 05-24-2012 04:58 am |
|
4th Post |
Jensenman Member
|
It should. It dropped my engine temps from ~205-210 on the highway to ~185-195.
|
|||||||||||||
|
Posted: 06-11-2012 11:10 pm |
|
5th Post |
Frank Schwartz Member
|
I need to do the same...can you send me apicture or particulars?? direct to mfsjr2@comcast.net Many thanks Frank
|
||||||||||||||
|
Posted: 06-12-2012 02:16 pm |
|
6th Post |
George Member
|
Hi Frank. I'll try to take a pic and send it. It was pretty straight forward. I cut a piece of metal about 8" by 36" and then mounted it under the front valence with the bolts holding on the oil cooler and the side supports for the valence. I sprayed it with undercoating. Looks good although I was so concerned about placement front to back, I got it off center side to side(!). oh well.
|
|||||||||||||
|
Current time is 04:07 am | |
> Jensen Healey & Jensen GT Tech > Cooling > Front spoiler | Top |