Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Front spoiler  Rating:  Rating
AuthorPost
 Posted: 04-30-2012 07:54 pm
  PM Quote Reply
1st Post
George
Member
 

Joined: 04-05-2005
Location: Boyds, Maryland USA
Posts: 88
Status: 
Offline
Hello.  I put a front spoiler on my JH5, really helped with cooling.  It looked good, however, it was kind of big.  Now i need something for my GT.   Is anyone using something a little smaller, either aftermarket or home made?  I guess i could buy a Club Store one and cut it down, but i am really just looking for something basic.  Any pics would be very helpful.

thanks

george

Back To Top PM Quote Reply  

 Posted: 05-20-2012 09:27 pm
  PM Quote Reply
2nd Post
Jensenman
Member
 

Joined: 04-14-2005
Location: Columbia, South Carolina USA
Posts: 156
Status: 
Offline
I made an aluminum 'extension' for the stock lower radiator opening which channels air into the radiator. It's not pretty but it really helps with the cooling, I painted it black so it wouldn't be so easy to see. I'll see if I can get a pic.

Back To Top PM Quote Reply

 Posted: 05-20-2012 11:45 pm
  PM Quote Reply
3rd Post
George
Member
 

Joined: 04-05-2005
Location: Boyds, Maryland USA
Posts: 88
Status: 
Offline
Thanks.  That's what I ended up doing as well, painted black too.  It only sticks out about 4 inches, but is well secured under the front valance.  i hope it helps.

 

Back To Top PM Quote Reply  

 Posted: 05-24-2012 04:58 am
  PM Quote Reply
4th Post
Jensenman
Member
 

Joined: 04-14-2005
Location: Columbia, South Carolina USA
Posts: 156
Status: 
Offline
It should. It dropped my engine temps from ~205-210 on the highway to ~185-195.

Back To Top PM Quote Reply

 Posted: 06-11-2012 11:10 pm
  PM Quote Reply
5th Post
Frank Schwartz
Member
 

Joined: 02-18-2011
Location:  
Posts: 313
Status: 
Offline
I need to do the same...can you send me apicture or particulars?? direct to  mfsjr2@comcast.net

Many thanks

Frank

Back To Top PM Quote Reply  

 Posted: 06-12-2012 02:16 pm
  PM Quote Reply
6th Post
George
Member
 

Joined: 04-05-2005
Location: Boyds, Maryland USA
Posts: 88
Status: 
Offline
Hi Frank.  I'll try to take a pic and send it.  It was pretty straight forward.  I cut a piece of metal about 8" by 36" and then mounted it under the front valence with the bolts holding on the oil cooler and the side supports for the valence.

I sprayed it with undercoating.  Looks good although I was so concerned about placement front to back, I got it off center side to side(!).  oh well.

Back To Top PM Quote Reply

Current time is 05:48 pm  
> Jensen Healey & Jensen GT Tech > Cooling > Front spoiler Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems