| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Remote Oil Filter | Rate Topic |
| Author | Post |
|---|
| Posted: 04-10-2012 02:50 pm |
|
1st Post |
|
Mitch Ware Member 
|
On the race car that I am building, I want to use a remote oil filter housing and get the filter out from under the carbs. To this end, I need a version of the oil cooler sandwich plate that usually goes between the filter and pump housing, but is blank on the filter side so that oil will just be sent via lines to the remote housing that I am mounting on the right frame rail. Anyone know of a suitable item that would work? Thanks, Mitch Ware #19670 #11002
|
||||||||||||||
| |||||||||||||||
| Posted: 04-10-2012 03:21 pm |
|
2nd Post |
|
RG Member
|
Hey Mitch, Canton has Remote Filter Adapters.... I believe the OEM Lube Oil Filter thread is 3/4 x 16 but check...they also have the remote mounting plate. What's nice about their adapter is that the inlet/outlet ports rotate 360>. http://www.cantonracingproducts.com Rob #13934
|
|||||||||||||
| ||||||||||||||
| Posted: 04-10-2012 08:18 pm |
|
3rd Post |
|
Mitch Ware Member
|
Ah, I see where they have that, thanks! Mitch Ware #19760 #11002 Last edited on 04-10-2012 08:19 pm by Mitch Ware |
||||||||||||||
| |||||||||||||||
| Current time is 04:15 pm | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > Remote Oil Filter | Top |
