| Moderated by: Greg Fletcher | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Pernell Member
|
Would anyone know where I could get the standard specifications for the wheel alignment on my Mk4 JH. This is using a 4 wheel alignment machine. |
|||||||||
|
colinw59 Member 
|
Here is the alignment geometry for the JH directly from the Workshop Manual:- Front wheel alignment 0 - 0.90" toe (0 - 2.3mm) Camber angle -1.0 deg. + or - 0.5 deg. (kerb weight) Castor angle* +2.5 deg. to + 3.0 deg. (kerb weight), within 15' side for side. Steering pivot inclination* 7.92 deg to 10.42 deg. (or 7.0 deg 55.0 sec to 10.0 deg 25.0 sec) Car must be standing level within 0.24" (6.1mm) side for side at the front and rear. * Note To quote the manual "There is no provision for altering camber angle or steering pivot inclination" |
|||||||||
|
Pernell Member
|
Thanks very much, I've just acquired the Jensen and know I need a manual. Cheers Pernell |
|||||||||