Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Electrical & Instruments > REMOVAL OF KEY IGNITION SWITCH FROM STEERING COLUMN

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
REMOVAL OF KEY IGNITION SWITCH FROM STEERING COLUMN  Rating:  Rating
AuthorPost
 Posted: 07-11-2006 03:22 am
  PM Quote Reply
1st Post
Timothy Slovak
Member
 

Joined: 06-28-2006
Location:  
Posts: 7
Status: 
Offline
 The ignition switch and steering column lock are bolted to the steering column via some sort of "U" clamp.  I need to remove same and replace with a used unit that actually works.  However, it appears that the manufacturer used some type of anti-theft fasteners to clamp the ignition switch/steering column lock to the steering column. 

Other than cutting the clamping portion off of the steering column, has anybody used any other means or know how to effect the removal of the ignition switch from the steering column ?

Thanks!!

 

 
Back To Top PM Quote Reply  

 Posted: 07-11-2006 03:29 am
  PM Quote Reply
2nd Post
Ron Mau
Member
 

Joined: 03-14-2005
Location: Davenport, Iowa USA
Posts: 61
Status: 
Offline
 I used a dremel and cut a slot into the snap off head and then used a screwdriver to remove the bolt.

Ron Mau
Back To Top PM Quote Reply

 Posted: 07-11-2006 03:41 pm
  PM Quote Reply
3rd Post
Judson Manning
Member


Joined: 03-14-2005
Location: Atlanta, Georgia USA
Posts: 406
Status: 
Offline
 The shop manual is pretty clear in that the only way to remove it is to drill out the tamper-resistant screws.  Ron may have the right idea with the dremel tool.
Back To Top PM Quote Reply  

 Posted: 07-13-2006 02:30 am
  PM Quote Reply
4th Post
Timothy Slovak
Member
 

Joined: 06-28-2006
Location:  
Posts: 7
Status: 
Offline
 Ron,

 

         Thanks, good advice it worked like a charm, now all I have to do is to put it back together.  Again, thank you.

 

Tim
Back To Top PM Quote Reply

 Posted: 07-13-2006 02:32 am
  PM Quote Reply
5th Post
Timothy Slovak
Member
 

Joined: 06-28-2006
Location:  
Posts: 7
Status: 
Offline
 Judson,

 

Thank you for the shop manual tip - I need to spend more time in the manual.  I was able to use the dremel approach successfully.

Thanks Again,

 

Tim

 
Back To Top PM Quote Reply  

Current time is 03:01 am  
> Jensen Healey & Jensen GT Tech > Electrical & Instruments > REMOVAL OF KEY IGNITION SWITCH FROM STEERING COLUMN Top


UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems