| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Fusable Link or Mega Fuse? | Rate Topic |
| Author | Post |
|---|
| Posted: 09-01-2005 12:09 am |
|
1st Post |
|
edward_davis Member 
|
Has anyone out there used a fusable link or large-amperage fuse to protect their ignition and/ or alternator/ battery circuits? After all of the work I've done getting my headlights, etc. to work, it has occurred to me that there are still several places I could have disastrous shorts in my wiring harness that could result in damage or destruction of my JH. Also, I've heard that fusable links aren't a good way to protect the car because they still burn in a dramatic fashion that could ignite vapors under the hood. Any ideas out there?
|
||||||||||||||
| |||||||||||||||
| Posted: 09-01-2005 01:08 am |
|
2nd Post |
|
Mark Rosenbaum Member 
|
Ford used to use a really short fusible link for general system protection, but I'm under the impression they quit doing that in the late 1970s or early 1980s. Might have been a cost cutting measure, or maybe they had one fail in an exciting manner and got sued as a result, or perhaps my memory is faulty... don't know. Personally, I wouldn't worry about trying to protect the alternator with a fuse or equivalent -- the odds are very high that the alternator diodes will burn out long before the wiring melts. Also, I don't see any need for a fuse in the ignition circuit if you still have the ballast in place. For the headlights, however, relays and suitable fuses might be a good idea if for no other reason than to protect the various switches, and an inline fuse for the lights at the rear of the car might be desirable too.
|
|||||||||||||
| ||||||||||||||
| Current time is 04:45 pm | |
| > Jensen Healey & Jensen GT Tech > Electrical & Instruments > Fusable Link or Mega Fuse? | Top |
