| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Speedo Cable | Rate Topic |
| Author | Post |
|---|
| Posted: 11-08-2010 12:25 am |
|
1st Post |
|
RG Member
|
I am in the midst of removing the instrument cluster. Released the tach and speedo brackets and did battle with the "evil spike" ...... the spike is free (more about that later). I am stymied by the removal of the speedo cable from the back the speedo....please advise. The "spike" is free...but unfortunatly the "spike bracket" has come unfastened....It appears that it was originaly pop riveted. I am considering refastening with self tapers....has anyone else ever had this occur? There does not appear to be room to get a rivet gun in to re-rivet. Any suggestions? Thanks in advance.
|
||||||||||||||
| |||||||||||||||
| Posted: 11-08-2010 02:58 am |
|
2nd Post |
|
Art DeKneef Member
|
If your cable was like one of mine there is a sort of catch that you press and then pull back on the cable. It should slide off. Another car the speedo cable was held on with wire and duct tape. The catch had broken off.
|
|||||||||||||
| ||||||||||||||
| Posted: 08-02-2019 10:26 pm |
|
3rd Post |
|
browndog9 Member
|
Had to learn how to remove and attach speedo cable just recently. The trick is to locate what to lightly squeeze to release the tab in the retention slot of the speedometer. You can reach up and feel a plastic collar the moves 360 degrees around the speedometer cable and attaches the cable to the speedometer. The are two protrusions that go from this collar away from the speedometer. One has a single stalk, the other has two stalks. Gently, with almost no effort, press the dual stalk down towards the cable while slipping the speedometer forward. Easy to see once the speedometer is removed what your doing.
|
||||||||||||||
| |||||||||||||||
| Current time is 01:14 pm | |
| > Jensen Healey & Jensen GT Tech > Electrical & Instruments > Speedo Cable | Top |
