| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Burning Wire | Rate Topic |
| Author | Post |
|---|
| Posted: 11-23-2009 10:32 pm |
|
1st Post |
|
12371 Member
|
Greetings! I was having trouble getting a good spark to the plugs. I was convenienced that my Crane HEI was out of phase so I sent it to Advanced for a rebuild. On reassembly it went back in without a lot of swearing and I thought my troubles were over. When I was cranking it to do the timimg, smoke was visible from under the hood. After a second round of cranking I found the culprit wire in the bundle coming out under the fuse box on the firewall. It is ( I believe) a white/slate wire but for the life of me I can't find it on my wiring diagram. Any ideas where it came from or where it goes?
|
||||||||||||||
| |||||||||||||||
| Posted: 11-23-2009 10:53 pm |
|
2nd Post |
|
John Finch Member
|
John Kimbrough has an excellent page that might be of help. See the link below. Best of luck. http://home.comcast.net/~jrkengr2/html/wiring.html
|
|||||||||||||
| ||||||||||||||
| Posted: 11-25-2009 04:43 pm |
|
3rd Post |
|
Greg Fletcher Administrator 
|
The beauty of British wiring is that the color tells you everything in a nut shell. A white main wire with a slate tracer should be, on all British cars, current tachometer to ignition coil.
|
||||||||||||||
| |||||||||||||||
| Current time is 05:07 pm | |
| > Jensen Healey & Jensen GT Tech > Electrical & Instruments > Burning Wire | Top |
