| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Replacement brake lines from automec | Rate Topic |
| Author | Post |
|---|
| Posted: 03-24-2023 05:56 pm |
|
1st Post |
|
Darth V8R Member 
|
Lads: Wanted to pass this along. Automec is now offering replacement brake lines for left hand drive JHs. They previously offered only RHD sets. I made an inquiry, and they told me that if I was willing to measure m brake pipes they would create the necessary kit. I passed along the measurements and they got back to me. Here is the link: LHD Automec JH Pipe set If you prefer steel, In-line Tube offers a pipe set in steel, pre-bent: LHD In Line JH pipe set I have not personally used either of these (yet) for my JH, although I have used Automec for other cars and found them to be an easy to use quality product. The downside to the Automec stuff is that you cannot get those laser straight runs of piping that make things look OEM. I suppose you could use a tubing straightener, but the pipes are coiled when delivered, so getting them straight is difficult without a tool. When I get around to reinstalling the brake pipes on my project, I will report back. Since the car has yet to go off to paint, it will be a while. Vance Last edited on 03-24-2023 05:59 pm by Darth V8R |
||||||||||||||
| |||||||||||||||
| Posted: 03-24-2023 08:24 pm |
|
2nd Post |
|
redracer Member
|
Thanks for the info. Fortunately, I some expensive tools for making as well as straightening lines in whatever metal one prefers. I have saved many of the end fittings for such, but one can get them in usually bulk packs. Here's a reasonably priced source: https://store.fedhillusa.com/britishgirling-316475nutsandfittings.aspx
|
|||||||||||||
| ||||||||||||||
| Posted: 03-03-2024 01:08 am |
|
3rd Post |
|
xman Member
|
I have had good luck with classictube.com. They have LHD JH brake pipe sets in oem and stainless. The lines are pre-bent but do need some tweaking to fit. I thought they were a good deal. From my own experience: brake lines will rust first from the inside and cause uneven braking.
|
||||||||||||||
| |||||||||||||||
| Posted: 03-03-2024 04:47 pm |
|
4th Post |
|
gmgiltd Member
|
I believe you need to be a little bit careful using stainless depending on the grade because of preferential corrosion. No idea if its available stateside, but I put cunifer brake lines on in the early 1980s and they are still like new. If you havent come across it its an alloy of copper, nickel and iron - ductile and corrosion resistant.
|
|||||||||||||
| ||||||||||||||
| Current time is 03:20 am | |
| > Jensen Healey & Jensen GT Tech > Brakes > Replacement brake lines from automec | Top |
