| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Lockheed or Girling? | Rate Topic |
| Author | Post |
|---|
| Posted: 05-04-2019 08:13 pm |
|
1st Post |
|
Steve Duncan Member
|
If you had a choice between Lockheed or Giriling brakes on the rear axle, which would you choose and why?
|
||||||||||||||
| |||||||||||||||
| Posted: 05-05-2019 04:24 pm |
|
2nd Post |
|
redracer Member
|
Interesting choice: For regular street use, one would prefer the Lockheed since they are self adjusting, unlike the Girling; however, for road racing the Girling was preferred since they could be adjusted so there is no drag from the shoes on the drum(Formula "V" racers do this since they are horsepower challenged). But, the Lockheed were actually put on incorrectly(the position they are in for bleeding still has some air in it). In 1996 at the Jensen national at the CAL/NEVA Lodge, there was someone with a nice prepared race car(don't remember his name; he was from Oregon or Washington)who had noticed this and had talked with someone from the old factory about it. Apparently, Jensen somehow got the drawings backward and the left plate should have been on the right & vise-versa(check it out with yours). Maybe upgrade with some of the recent articles here? bruce
|
|||||||||||||
| ||||||||||||||
| Posted: 05-07-2019 04:07 pm |
|
3rd Post |
|
Steve Duncan Member
|
Thanks. Other opinions?
|
||||||||||||||
| |||||||||||||||
| Posted: 05-08-2019 05:09 am |
|
4th Post |
|
Tom Bradley Member
|
I have been happy with the Lockheeds on my car: they are reasonably easy to work on and the hand brake holds better than other British roadsters I have known. There is also something to be said for keeping whatever was originally in the car--Lockheed from #14064 on and Girling before. That way there will not be any confusion about what parts to order if someone other than yourself ever has to work on them.
|
|||||||||||||
| ||||||||||||||
| Posted: 05-10-2019 06:37 am |
|
5th Post |
|
CDA951 Member
|
Tom Bradley wrote: I have been happy with the Lockheeds on my car: they are reasonably easy to work on and the hand brake holds better than other British roadsters I have known. There is also something to be said for keeping whatever was originally in the car--Lockheed from #14064 on and Girling before. That way there will not be any confusion about what parts to order if someone other than yourself ever has to work on them. Apparently the previous owner of #19250 missed that memo, as it has the earlier Girling brakes installed. :) That said, the Girlings are very easy to work on and adjust, and parts are readily available.
|
||||||||||||||
| |||||||||||||||
| Current time is 06:12 pm | |
| > Jensen Healey & Jensen GT Tech > Brakes > Lockheed or Girling? | Top |
