| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| brake line fitting | Rate Topic |
| Author | Post |
|---|
| Posted: 03-05-2018 02:21 am |
|
1st Post |
|
Bfitz241 Member 
|
Would anyone know the size and thread of the brake line fittings where they attach t o the master? I'm having no luck finding any locally and will have to order them from somewhere. Are they British thread? Thanks
|
||||||||||||||
| |||||||||||||||
| Posted: 03-05-2018 03:57 pm |
|
2nd Post |
|
redracer Member
|
Try typing in "British brake line fittings"; here's one place: http://store.fedhillusa.com/britishgirling-316475nutsandfittings.aspx Try Earl's as well. British Girling 3/16"/4.75mm brake line tubing nuts and fittings. store.fedhillusa.com/britishgirling-316475nutsandfittings.aspx Results 1 - 15 of 15 - British/Girling - 3/16"/4.75mm brake line Nuts and Fittings. You must know the proper tubing size for your application first! You must use the same tube size that came installed on your vehicle. All the nuts on this page are for 3/16"/4.75mm brake lines.
|
|||||||||||||
| ||||||||||||||
| Posted: 03-05-2018 05:35 pm |
|
3rd Post |
|
Bfitz241 Member
|
thanks..that's very helpful
|
||||||||||||||
| |||||||||||||||
| Posted: 03-05-2018 06:40 pm |
|
4th Post |
|
redracer Member
|
As a follow up to the above website I posted:(the rear brake line fittings from the master are 3/8"X24 whereas the front brake fittings are 7/16"X20): P10-3 - 3/8" x 24 unf male steel nut with non-threaded lead - SAE flare and DIN flare 3/8 Price: $2.20 Quantity: 1 Submit P10-3 - 3/8" x 24 unf male steel nut with non-threaded lead - SAE flare and DIN flare Most common British nut 3/8" x 24 unf male steel nut with non-threaded lead, .812” long overall This nut works with both SAE (45 degree/ inverted/double) and DIN (bubble/ISO) flares Use with 3/16"/4.75mm brake line ********************************************************** P26-3 - 7/16" x 20 unf male steel nut with non-threaded lead - SAE flare or DIN flare 7/16 Price: $3.50 Quantity: 1 Submit P26-3 - 7/16" x 20 unf male steel nut with non-threaded lead - SAE flare or DIN flare 7/16" x 20 unf male steel nut with non-threaded lead, .900” long overall This nut works with both SAE (45 degree inverted/double) and DIN (bubble/ISO) flares Use with 3/16"/4.75mm tubing
|
|||||||||||||
| ||||||||||||||
| Current time is 02:26 am | |
| > Jensen Healey & Jensen GT Tech > Brakes > brake line fitting | Top |
