| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| more oil in my distributor | Rate Topic |
| Author | Post |
|---|
| Posted: 03-25-2017 10:34 pm |
|
1st Post |
|
Bfitz241 Member 
|
As the title says, oil in the distributor....engine won't run well at all. Please forgive my lack of familiarity with the 907 platform, but I did try searching and checked the service manual and still came up negative. What exactly fails and allows the oil into the distributor? Is it the distributor is worn out, is there a seal in the oil pump housing that fails? I had installed a seal in my distributor, the McMaster Carr part, it lasted 717 miles. I had changed the oil [used VR1 20w-50 if it matters] at 700 miles and the distributor failed in 17 miles. Obviously this needs to be fixed. I'm going to get a new distributor but is there something else that needs to changed. thanks
|
||||||||||||||
| |||||||||||||||
| Posted: 03-26-2017 06:10 am |
|
2nd Post |
|
Esprit2 Member
|
There's only one route for oil into the distributor, and the seal should keep it out. Obviously, the seal has failed. The question would be "why?" Is it a bad seal, or is the shaft damaged/ corroded in a way that is quickly tearing up the seal. Either way, you need another seal. Some distributor shops will argue against installing a seal at all. They point out that a lot of Britcars used the Lucas distributor, and none of them use a seal. But they all mount the distributor vertically, and oil runs down hill. The 907 is unique in mounting the distributor horizonntally, and it does require a seal. Good luck, Tim Engel Last edited on 03-27-2017 05:57 pm by Esprit2 |
|||||||||||||
| ||||||||||||||
| Posted: 03-26-2017 09:25 pm |
|
3rd Post |
|
Bfitz241 Member
|
thanks........I will look into that... I understand what you're saying about distributor rebuilders.... I had one highly touted distributor rebuilder tell me in no uncertain terms that the reason my distributor had oil in it was because my engine was worn out and it was generating too much crankcase pressure thereby forcing oil into the distributor. It doesn't pay to try to talk to guys like that....I'll give my money to someone else. Last edited on 03-27-2017 12:07 am by Bfitz241 |
||||||||||||||
| |||||||||||||||
| Posted: 04-03-2017 12:13 am |
|
4th Post |
|
Bfitz241 Member
|
bought the distributor from the club store. Very happy with it. Runs very well.
|
|||||||||||||
| ||||||||||||||
| Current time is 12:36 pm | |
| > Jensen Healey & Jensen GT Tech > Ignition > more oil in my distributor | Top |
