Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Dellorto 40 leaks  Rate Topic 
AuthorPost
 Posted: 08-04-2013 03:50 am
  PM Quote Reply
1st Post
francisg
Member
 

Joined: 02-20-2009
Location: San Rafael, California USA
Posts: 28
Status: 
Offline
To all you experts, after about 3 years and vast amount of  money my "Phoenix" is coming close to resurection. However my mechanic (a Lotus guy) tells me that one of the inner throttle shaft bushing is leaking air and causing popping. My questions are how common is this problem, what is the fix, and is there is a way to check if the shaft is twisted, as, from what i have read so far that is a fairly common problem. The problem carb also shows corrosion pitting inside, but before the butterfly, are there any fix for that and is it a problem? Thanks to all.

Back To Top PM Quote Reply  

 Posted: 08-05-2013 05:51 pm
  PM Quote Reply
2nd Post
Greg Fletcher
Administrator


Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 430
Status: 
Offline
It's not uncommon on high mileage carbs. The fix to either replace the shaft or rebush the shaft or both depending on the type and amount of wear. At that point, you'd be well severed by getting the carbs rebuilt by someone that knows them and make sure nothing else is wrong. That said, I would still be extra sure that the jetting is spot on, which is a much more common problem on the JH.

Back To Top PM Quote Reply

 Posted: 08-25-2013 06:52 pm
  PM Quote Reply
3rd Post
francisg
Member
 

Joined: 02-20-2009
Location: San Rafael, California USA
Posts: 28
Status: 
Offline
Thanks for the information, would you have any suggestion for someone familiar with doing such rebuild in NorCal?
FranciG

Back To Top PM Quote Reply  

 Posted: 08-25-2013 07:42 pm
  PM Quote Reply
4th Post
Jensen Healey
Super Moderator


Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
I'll call a friend. He is rebuilding a set and IIRC had the shafts chromed to bring them into tolerance. I'll find out where he's getting the work done.

Kurt

Back To Top PM Quote Reply

 Posted: 08-26-2013 01:37 am
  PM Quote Reply
5th Post
Jensen Healey
Super Moderator


Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
The Carburettor Refactory in Richmond. 815 Harbour Way S, Unit #5 Richmond, CA 94804 (510) 237-1277

Back To Top PM Quote Reply  

Current time is 06:18 am  
> Jensen Healey & Jensen GT Tech > Carburetors > Dellorto 40 leaks Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems