| Moderated by: Greg Fletcher | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
francisg Member
|
Does anyone have a suggestion for an optimum size/length of the Velocity stacks to be used for the twin DHLA 40 carburetor on a stock motor for optimum performance? i have seen 20mm stacks all the way to 150mm. What is best and where is a good source. Thanks to all. FG |
|||||||||
|
subwoofer Member
|
I would go with the stock length, roughly 40mm. This is what Lotus put on them in combination with their airbox, and should be a good match to the power band. -- Joachim |
|||||||||
|
Jensen Healey Super Moderator 
|
http://www.velocity-of-sound.com/velocity_of_sound/calculator3.htm Kurt |
|||||||||
|
francisg Member
|
Thanks to all for the help. I guess i will stick with the stock size, if i can only find some. |
|||||||||
|
Jensen Healey Super Moderator
|
http://www.cbperformance.com/catalog.asp?ProductID=512 These are for the DRLA but only need the holes modified to fit. |
|||||||||