| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Petronix & plug gap | Rate Topic |
| Author | Post |
|---|
| Posted: 08-04-2010 04:47 pm |
|
1st Post |
|
colinw59 Member 
|
I've heard that if you install a Petronix ignition and coil you should open the plug gap up to 0.035". Which, if I remember correctly, is 0.010 over stock! Is this correct?
|
||||||||||||||
| |||||||||||||||
| Posted: 08-04-2010 05:21 pm |
|
2nd Post |
|
Greg Fletcher Administrator 
|
Yes, that's a smart idea. The usefulness of increasing the gap will vary depending on what type of coil you are running, if using a Blaster Coil, I'd say it's essential. If using the stock or a Lucas Super Sport coil, a smaller increase in the gap may still help.
|
|||||||||||||
| ||||||||||||||
| Posted: 08-04-2010 05:53 pm |
|
3rd Post |
|
colinw59 Member
|
It's a Petronix coil Greg.
|
||||||||||||||
| |||||||||||||||
| Posted: 08-08-2010 01:00 am |
|
4th Post |
|
Paul Koehler Member 
|
I run .032 with good results.
|
|||||||||||||
| ||||||||||||||
| Current time is 04:19 am | |
| > Jensen Healey & Jensen GT Tech > Carburetors > Petronix & plug gap | Top |
