| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Block Drains? | Rate Topic |
| Author | Post |
|---|
| Posted: 12-17-2006 11:58 am |
|
1st Post |
|
smcmanus Member 
|
Are there any block drains? I want to give it a good flushing before I fill it up. Have a nice day Steve
|
||||||||||||||
| |||||||||||||||
| Posted: 12-18-2006 01:28 am |
|
2nd Post |
|
Mark Rosenbaum Member 
|
While the factory's parts list drawings for the early and late blocks show a drain valve on the engine's left side, neither my car's engine (#6835) nor my spare (#9384) has a drain valve or even a hole for one.
|
|||||||||||||
| ||||||||||||||
| Posted: 12-18-2006 03:42 pm |
|
3rd Post |
|
smcmanus Member
|
I got it up in the air and can see what appears to be a big hex plug on the aft left side of the block. It is pretty hard to get at because the headers are right there. I haven't figured how to get it out. It may not be worth the hassle. This pic taken from under left wheel well. Have a nice day Steve Attachment: jhblockdrain.jpg (Downloaded 65 times)
|
||||||||||||||
| |||||||||||||||
| Posted: 12-18-2006 08:41 pm |
|
4th Post |
|
Ron Earp Member 
|
You can do pretty well removing your tstat and using compressed air with a rag to blow water from the block. Then, keep flushing with water from the hose and you'll get it all out and clean. Ron
|
|||||||||||||
| ||||||||||||||
| Posted: 12-19-2006 12:11 am |
|
5th Post |
|
smcmanus Member
|
I did it and it came out pretty clean Thanks Steve
|
||||||||||||||
| |||||||||||||||
| Current time is 10:39 pm | |
| > Jensen Healey & Jensen GT Tech > Cooling > Block Drains? | Top |
