| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Oil Seepage Through Bolts | Rate Topic |
| Author | Post |
|---|
| Posted: 12-07-2006 04:01 pm |
|
1st Post |
|
73healey Member
|
I have some minor seepage of oil coming through some bolts. I have tried tightening but it has not stopped. Is there something I can use to seal the bolt threads? Jim
|
||||||||||||||
| |||||||||||||||
| Posted: 12-08-2006 12:36 am |
|
2nd Post |
|
Ron Mau Member
|
Hi Jim, What bolts and where are they? We need more info. Ron Mau
|
|||||||||||||
| ||||||||||||||
| Posted: 12-08-2006 02:54 pm |
|
3rd Post |
|
Judson Manning Member 
|
A little blue hylomar on the threads is usually enough to keep oil from seeping through bolts such as those on the flywheel. If you are referring to the cam-cover bolts, you'll need to install the 'seelock' washers available in the club store.
|
||||||||||||||
| |||||||||||||||
| Posted: 12-09-2006 05:28 pm |
|
4th Post |
|
73healey Member
|
Thanks for the advice. The seepage seems to be coming from the top bolts on the auxiliary housing. Will the hylomar work for this application and if so is there any special preparation necessary before applying? Thanks again Jim
|
|||||||||||||
| ||||||||||||||
| Current time is 09:10 am | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > Oil Seepage Through Bolts | Top |
