| ||||
> Jensen Healey & Jensen GT Tech > Engine & Transmission > High Torque Starter and Early MkI Clocking/Fit |
| ||||
> Jensen Healey & Jensen GT Tech > Engine & Transmission > High Torque Starter and Early MkI Clocking/Fit |
| Moderated by: Greg Fletcher |
|
||||||||||||||
| High Torque Starter and Early MkI Clocking/Fit | Rate Topic |
| Author | Post |
|---|
| Posted: 04-14-2022 01:36 am |
|
1st Post |
|
WhatsUpDOHC Member 
|
Hi everyone I bought a high torque starter similar to this one: https://www.classiccarperformance.com/products/jensen-healey I've clocked it around to a number of positions and can't seem to get it to fit. The battery lug on it when rotated hits the bolt that holds down the oil breather. Also if I rotate it the other way, I can't get to the bolt hole. I've seen pictures of this starter on a MKII but there is no oil breather to get in the way on those motors. The store that sold it to me will take it back but I wanted to check with you before returning it. Does anyone have experience with this type starter and fit? Thank you Mark
|
||||||||||||||
| |||||||||||||||
| Posted: 04-14-2022 07:05 pm |
|
2nd Post |
|
discogodfather Member 
|
I don't know that style of motor, I went with the Nippon Denso style and it's so small and easy to fit, even with the breather. Check out my old thread on it: http://jensenhealey.com/forums/view_topic.php?id=2605&forum_id=7 There is also the Gustafsen which is similar.
|
|||||||||||||
| ||||||||||||||
| Posted: 04-14-2022 09:45 pm |
|
3rd Post |
|
WhatsUpDOHC Member
|
Thanks DGF! Your thread is the one I've been reading the most. I have an engine like your engine. I was looking at the WOSP starter that you recommend but the thing is expensive. I can't find a source for the Gustafson starter. I was hoping that someone had experience with the starter that I bought. Mark
|
||||||||||||||
| |||||||||||||||
| Posted: 04-15-2022 05:07 am |
|
4th Post |
|
dwalls1 Member
|
Mine was not exactly like yours, but I do remember that one of the two mounting bolts had to be a socket head bolt and a ball end allen wrench was very handy. A worthwhile upgrade from the lucas unit.
|
|||||||||||||
| ||||||||||||||
| Posted: 04-15-2022 04:11 pm |
|
5th Post |
|
WhatsUpDOHC Member
|
dwalls1 wrote:Mine was not exactly like yours, but I do remember that one of the two mounting bolts had to be a socket head bolt and a ball end allen wrench was very handy. A worthwhile upgrade from the lucas unit. Thanks for the reply! Yeah, I'm thinking I might just have to bite the bullet and accept that I'm going to turn that bottom starter bolt 1/16 at a time and hope that I don't have to remove it for a couple of years (knock wood). Why should removing the starter be any different than any other bolt on this motor? But, I knew what I was getting into. I think.
|
||||||||||||||
| |||||||||||||||
| Posted: 04-17-2022 03:14 am |
|
6th Post |
|
WhatsUpDOHC Member
|
dwalls1 wrote:Mine was not exactly like yours, but I do remember that one of the two mounting bolts had to be a socket head bolt and a ball end allen wrench was very handy. A worthwhile upgrade from the lucas unit. Hello again! I took another crack at it and put the starter in place and then saw exactly what you were talking about. Thank you for the suggestion - The starter is in! You saved me from having to return the starter and find a new one. Thank you!
|
|||||||||||||
| ||||||||||||||
| Posted: 04-17-2022 04:12 am |
|
7th Post |
|
dwalls1 Member
|
Wow, you've made my day. I feel useful. It's been a year since I sold my J-H and the dealer I sold it to is still sitting on it. I don't know what's up with that, but if you know any one looking for a good J-H I could steer them to it. Mean while, enjoy yours and be assured that your starter will not be a source of trouble. Praise God. He is risen!
|
||||||||||||||
| |||||||||||||||
| Current time is 05:36 am | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > High Torque Starter and Early MkI Clocking/Fit | Top |
