| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| TIMING BELT UPDATE | Rate Topic |
| Author | Post |
|---|
| Posted: 02-24-2021 02:25 pm |
|
1st Post |
|
redracer Member
|
A few years ago, Tim Engel mentioned this high performance belt. I had never heard of it so I decided to get one(ROCKAUTO) and installed it on my car in June, before the 2018 Jensen National in Black Mountain, N.C. Forward 15 months to the 2019 September National in St. Louis. I thought "better retension the belt". Well, the belt did NOT need retensioning after 15 months!!!, something I definitely would have had to do with the old regular "black belts". I will now only stock them, and the current price has come down as well, making for a huge safety net for jumping timing. High Performance GATES T104RB {Click Info Button for Alternate/OEM Part Numbers} High Performance Info One of our most popular parts $56.79
|
||||||||||||||
| |||||||||||||||
| Posted: 02-24-2021 06:34 pm |
|
2nd Post |
|
Esprit2 Member
|
Stability is one of the advantages of the Gates Racing blue belts. After installation and initial tensioning, continue to check the tension periodically as spec'd in the manual's Service Schedule, but it's unlikely that you will ever have to adjust it again. Gates Racing is Gates Rubber's specialty products division, and they make the unique and limited volume belts. Blue is their trademark color, hence the blue belts. The Blue is just a laminate layer and contributes nothing to the performance of the belt. The key to the belt's performance is the modern HNBR rubber, and the materials used in the chord body. The trapezoidal belt is old school and not used on any modern engines, and the 'vintage' market is small. So when an HNBR version was introduced for the vintage market, Gates Racing made it, and it was blue. Now it seems that either Gates Rubber has taken over production, or is 'also' producing it, because I'm seeing black versions of T104RB as well. Other than being black (no blue laminate), it's the same belt. So if you order a T104RB and receive a black belt, don't freak out. It's the same quality and durability, it's just not blue. Regards, Tim Engel
|
|||||||||||||
| ||||||||||||||
| Posted: 02-24-2021 07:07 pm |
|
3rd Post |
|
Esprit2 Member
|
The T104RB HNBR rubber timing belt requires a different tension that is a little lower than the tension spec'd for the old-school HCR and HSN black belts. T104RB Belt (both Gates Racing Blue, and Gates Rubber Black). Burroughs = Krikit KR-1 . . . 82-84 = 34-35 on the KR-1's 'Pounds' scale. For the old HCR and HSN black belts, I recommend setting the initial tension 3-5 pounds high in order to allow for initial stretch. But with the HNBR T104RB belt, there is no noticeable initial stretch, so only one tension spec for both new and used T104RB belts. *~*~*~*~* Old-School HCR & HSN Black Belts: Burroughs. = Krikit KR-1 . . . . . . 90 = 50 Normal Minimum - Time to Re-Tension. . . . . . . 95 = 52 For re-tensioning a USED belt. . . . 98-100 = 53-55 For installation of NEW belts, in order to allow for initial stretch. Regards, Tim Engel
|
||||||||||||||
| |||||||||||||||
| Posted: 02-25-2021 10:28 am |
|
4th Post |
|
discogodfather Member 
|
 Last edited on 02-25-2021 10:29 am by discogodfather |
|||||||||||||
| ||||||||||||||
| Current time is 09:24 pm | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > TIMING BELT UPDATE | Top |
