| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| carbon cannister | Rate Topic |
| Author | Post |
|---|
| Posted: 02-22-2021 09:46 pm |
|
1st Post |
|
74beans Member
|
My carbon canister is shot. A couple questions: 1. If I remove it do I just plug vacuum line from manifold and vapor(?)one coming from tank? Do I have to make sure vapor line end is above tank level? As you know getting back into the hook-up on top of tank is not a fun job, and it doesn't seem to get any easier the more times I do it. 2. If I replace it does anyone know what the third nipple(?) is for? I have one that came from tank and one from vacuum. I like the idea of not emitting more gas fumes into the air.
|
||||||||||||||
| |||||||||||||||
| Posted: 02-22-2021 11:10 pm |
|
2nd Post |
|
redracer Member
|
You could remove it, but DO NOT plug the line from the gas tank(possible vacuum created). You could plug off the 2 brass nipples on the back of each carb., or just run a fuel line between them. The 3rd nipple originally had a red plastic plug in it--yours must be missing
|
|||||||||||||
| ||||||||||||||
| Current time is 04:34 am | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > carbon cannister | Top |
