| ||||
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Jensen Healey Specific - Eccentric Tensioner Hub |
| ||||
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Jensen Healey Specific - Eccentric Tensioner Hub |
| Moderated by: Greg Fletcher | Page: 1 2 3   |
|
|||||||||||||
| Jensen Healey Specific - Eccentric Tensioner Hub | Rate Topic |
| Author | Post |
|---|
| Posted: 11-29-2016 09:10 am |
|
1st Post |
|
qwerty Member 
|
Jensen Healey Specific Manual Eccentric Hub. AUD$125.00 + 40.00 Express Shipping for 4 - 6 Business days (tracked) ~ USD$125-135 including shipping depending on exchange rate and paypal fees as of 24 Jan 2017 Ditch the 2x 6005's, the tensioner shell and sloppy adjustment nut and allow replacement with the superior 1 piece Timing Belt Bearing SKF 414871A or the Flennor FS03299. Either will fit this hub made especially for the Jensen Healey.
Attachment: Jensen Healey Eccentric Hub Tensioner 1.JPG (Downloaded 428 times) Last edited on 01-24-2017 10:07 am by qwerty |
||||||||||||||
| |||||||||||||||
| Posted: 11-29-2016 09:11 am |
|
2nd Post |
|
qwerty Member
|
1) Attachment: Jensen Healey Eccentric Hub Tensioner 2.JPG (Downloaded 426 times)
|
|||||||||||||
| ||||||||||||||
| Posted: 11-29-2016 09:12 am |
|
3rd Post |
|
qwerty Member
|
Did a minor update today to make sure the Nyloc is fully engaged on the stud. Please check when installing that you have some exposed thread when you torque the nyloc to specification. All Hubs now have this High Tensile Nyloc and Washer included. Attachment: 1.JPG (Downloaded 383 times) Last edited on 01-24-2017 10:09 am by qwerty |
||||||||||||||
| |||||||||||||||
| Posted: 11-29-2016 05:26 pm |
|
4th Post |
|
Esprit2 Member
|
You guys should all buy two. One as a worthwhile upgrade for your 907 engine, and one as a piece of sculpture for your desk. Regards, Tim Engel
|
|||||||||||||
| ||||||||||||||
| Posted: 11-29-2016 05:43 pm |
|
5th Post |
|
Esprit2 Member
|
This is a good upgrade over the OEM J-H tensioner assembly. Good stuff. There are junk bearing brands out there in the world, but IMHO, you can't go wrong with SKF. They're a top drawer bearing manufacturer. Flennor makes timing belts (like Gates, Goodyear, Dayco, etc). The tensioner bearing Flennor markets has recently become popular in the Lotus world, and JAE sells it... although they'll also sell you an SKF if you specifically request it. Or you can get one of many comparable brands at a local bearing supply. Just drop the SKF part number, and they can cross-reference it. But by 'quality', don't buy cheap. There's a visual clone of this bearing that has blue seals. It's one of those 'junk' bearings mentioned above, and every example I've seen has been bad out of the box. It's made in China. I don't recall the brand name, but it's something silly like "Blue Bird"... or blue-something. With blue seals. Stay safe, don't buy a bearing with blue seals. I know that excludes other good bearings that happen to have blue seals, but it will also keep you from this bad one. Regards, Tim Engel Last edited on 11-29-2016 06:17 pm by Esprit2 |
||||||||||||||
| |||||||||||||||
| Posted: 11-29-2016 06:08 pm |
|
6th Post |
|
qwerty Member
|
Funny you say that, i have one in the car and one on my desk now. :)
|
|||||||||||||
| ||||||||||||||
| Posted: 11-29-2016 06:27 pm |
|
7th Post |
|
Esprit2 Member
|
Off topic but... Early Lotus Esprits used a Citroen transaxle. A special tool is required to remove the large nut at the back of the secondary shaft, and I made one years ago. It's not pretty, but it works. A Citroen specialist in the Neatherlands, Harry Martens, developed an improved tool that's a 'real piece of work' just by design. Plus, it's beautifully machined out of stainless, then buffed to a shine. He asks US$250 for a glorified socket. I didn't need one, since my old hack still works. But I bought one just because it's such a fine piece of metal sculpture. Sometimes want exceeds need. Regards, Tim Engel Last edited on 11-29-2016 06:29 pm by Esprit2 |
||||||||||||||
| |||||||||||||||
| Posted: 01-20-2017 02:34 am |
|
8th Post |
|
jomac Member
|
what is the cost ? US $ and shipping charge.
|
|||||||||||||
| ||||||||||||||
| Posted: 01-20-2017 02:43 am |
|
9th Post |
|
jomac Member
|
Reply FYI>>>> about timing belts: there are numerous tooth patterns that look similar but are different, lotus used belt part number A907E0191ZE. i only buy belts directly from QED. They cost more but you know they're for the 907 cam pulleys.
|
||||||||||||||
| |||||||||||||||
| Posted: 01-21-2017 11:43 pm |
|
10th Post |
|
Esprit2 Member
|
The 907's original trapezoidal tooth belt is a 3/8" pitch Imperial belt (otherwise known as Profile Size "L"), and many companies sell that size. The only caveat is that you want 133 teeth and 1 inch wide. Other trapezoidal belts may have the same tooth shape, but they're all in incrementally different sizes (pitches). They won't match the pulley teeth and lay naturally against the pulley. You know right away if it's right or wrong. The round-tooth belts are more tricky. There are 3/8" pitch belts in HTD, GT1, and GT2 round tooth forms, and they look deceptively alike. But they're not the same, and the GT belts do NOT ride properly on the HTD pulleys. Gates Rubber makes more timing belts than any other brand in the world, and contract manufactures belts for many of the other big names you might think of as their competitors. For the trapezoidal tooth belt, just remember one part number... and depending upon where you live, it's... Gates T104 in the US, Canada, Australia, etc. Gates 5146 in the UK Walk into any good auto parts store/ motor factors, give them the Gates part number for the country you're in, and they can cross-ref to whatever brand they stock (everybody knows Gates). If it's a name brand you recognize, buy it. If it's a no-name, low-price special from China, don't buy it. Doing that will get you to something like... Dayco 95104 Goodyear 40104 Flennor 41133 Nipparts J1121030 If you want the 'best', longest lasting trapezoidal belt you can get at this time, then stretch your memory a little further, and ask for a Gates Racing T104RB blue belt. Write it down and put it in the glove box. Available at RockAuto.com and NAPA in North America. Regards, Tim Engel Last edited on 01-21-2017 11:52 pm by Esprit2 |
|||||||||||||
| ||||||||||||||
| Posted: 01-22-2017 08:25 am |
|
11th Post |
|
Frank Schwartz Member
|
Yes...how much for the tensioner and shipping etc to USA?? Or off line to me at mfsjr2@comcast.net Thank you, Frank
|
||||||||||||||
| |||||||||||||||
| Posted: 01-24-2017 09:53 am |
|
12th Post |
|
qwerty Member
|
Updated the Price in the title, appologies for the late reply. Ps we have a holiday weekend coming up this weekend so i may not reply until next week. Thank you. Last edited on 01-24-2017 09:55 am by qwerty |
|||||||||||||
| ||||||||||||||
| Posted: 01-25-2017 11:05 pm |
|
13th Post |
|
DonBurns Member
|
I would love to have one of these. Please provide a USD current price when available and PayPal info. Thanks- Don Burns
|
||||||||||||||
| |||||||||||||||
| Posted: 01-25-2017 11:15 pm |
|
14th Post |
|
Frank Schwartz Member
|
Me also...need to get o0u to send me invoice and I will pay by pay pal...USD to AUD is only 75% so exchange rate will save me a few dollars. Off this list at mfsjr2@Comcast.net
|
|||||||||||||
| ||||||||||||||
| Posted: 01-25-2017 11:23 pm |
|
15th Post |
|
Esprit2 Member
|
Frank & Don, Go up to the first message in this thread, and you'll see that Peter updated it with new pricing information as of Jan 24th. He wrote: > "AUD$125.00 + 40.00 Express Shipping for 4 - 6 Business days (tracked) > ~USD$125-135 including shipping depending on exchange rate and paypal fees as of 24 Jan 2017" Note that, as it's used above, the ~ (tilde symbol) means "approximately". Approximately USD$125-135 including shipping. Regards, Tim Engel Last edited on 01-25-2017 11:28 pm by Esprit2 |
||||||||||||||
| |||||||||||||||
| Posted: 01-26-2017 12:15 am |
|
16th Post |
|
DonBurns Member
|
Understood,but we can't send an approximate amount via PayPal. Need an amount and payment instructions.
|
|||||||||||||
| ||||||||||||||
| Posted: 01-26-2017 01:51 am |
|
17th Post |
|
Frank Schwartz Member
|
Yes, the way I understand it, you send us an invoice via Pay Pal and then we pay using the same media.. Frank I've ordered from the UK and although the seller prices it in UK pounds, when I pay, it is converted to US dollars and charged to me...works a treat, as the Brits say
|
||||||||||||||
| |||||||||||||||
| Posted: 03-23-2017 06:25 pm |
|
18th Post |
|
DonBurns Member
|
I believe we need an email address or PayPal account of some sort? Thanks-
|
|||||||||||||
| ||||||||||||||
| Posted: 03-24-2017 01:27 am |
|
19th Post |
|
Frank Schwartz Member
|
Yes..you can go to PayPal.com and open an account..they charge to your banking checking account. Widely used and very safe...you pay no fees, the seller pays the fees...Works great...but the seller has to send us an invoice or something so we can pay him...I am assuming he uses PayPal??? Maybe he will read this.... Also when you send money to pay a bill you are invoiced for, PayPal also sends your name and mailing or shipping address which you gave them when you opened the account. Quite easy and automatic. I use it very often buying things on eBay and so on...
|
||||||||||||||
| |||||||||||||||
| Posted: 03-24-2017 01:52 am |
|
20th Post |
|
DonBurns Member
|
I meant the sellers Paypal account. I have an account and use it all the time. Are SKF 414871A or Flennor FS03299 bearings actually available? I have been searching online, been to two auto parts stores and the Ford dealership and can't find either. Does anybody know a source? The closest I have come appears to be someone willing to provide an equivalent from China. Thanks-
|
|||||||||||||
| ||||||||||||||
| Current time is 04:44 pm | Page: 1 2 3 |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > Jensen Healey Specific - Eccentric Tensioner Hub | Top |
