| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Limited Slip Differential anyone? | Rate Topic |
| Author | Post |
|---|
| Posted: 11-26-2015 10:25 pm |
|
1st Post |
|
stevegarnjobst Member 
|
So, I've read through pages of old threads on past efforts to come up with a limited slip unit for the standard J-H rear axle. However, I'm very interested in adding a limited slip to my J-H project car, and can't use a non-standard axle like the Firenza, Toyota, or Mazda RX-7 to get one. So, I stopped by Gripper Differentials in Coventry, UK today. While there, I handed them a spare J-H differential carrier to use for measurements and possibly design & production of a limited slip unit for the J-H. They're hopeful a suitable design can be developed that avoids expensive custom tooling. There are currently two of us interested in a unit. If anyone else is interested, drop me a message, as more units will reduce the per unit price. Not a lot more details for now. Note - it may be a few weeks before we know the feasibility & cost. -Steve p.s. Gripper had a Vauxhall Firenza competition limited slip sitting on the shelf. If only my race rules allowed running the larger differential housing required for this diff... Last edited on 11-26-2015 10:27 pm by stevegarnjobst |
||||||||||||||
| |||||||||||||||
| Posted: 11-27-2015 06:42 am |
|
2nd Post |
|
subwoofer Member
|
I might be interested, but it naturally depends a bit on cost. Please inform if you get a ballpark figure and price profile vs units ordered. -- Joachim
|
|||||||||||||
| ||||||||||||||
| Posted: 12-21-2015 12:50 pm |
|
3rd Post |
|
stevegarnjobst Member
|
Good news! I just received word from John at Gripper, indicating a limited slip design has been completed, and production of 5 units is underway. Other than my one unit, I believe Lotusbits is acquiring the others. Anyone with serious interest should contact Gripper or Lotusbits ASAP. Note - I don't have a vested interest in this project, other than the one unit for my vehicle - I'm just passing this information on as a service to the J-H community. -Steve Contact info: Gripper LSD John McMahon tel: +44 024 7668 3239 email: sales@gripperlsd.com Lotusbits Mike Taylor tel: +44 019 2663 3211 Email: lotusbits@hotmail.com
|
||||||||||||||
| |||||||||||||||
| Posted: 12-21-2015 04:28 pm |
|
4th Post |
|
KICHR Member 
|
The other unit mentioned by Steve is going into my JH which already runs an engine by Lotusbits. Cost point right now seems to settle in at app GBP 1.100,- per unit without WAT or any applicable import tax. So there's still 3 units from this production run to go around... I for one look forward to what it does to the handling on the track. Kim
|
|||||||||||||
| ||||||||||||||
| Posted: 12-21-2015 04:37 pm |
|
5th Post |
|
stevegarnjobst Member
|
KICHR wrote:The other unit mentioned by Steve is going into my JH which already runs an engine by Lotusbits. So, was that your rear end assembly I hauled over to Gripper for Mike?
|
||||||||||||||
| |||||||||||||||
| Posted: 12-21-2015 05:01 pm |
|
6th Post |
|
KICHR Member
|
Very probably! I left it with Mike a few weeks ago to let him have a go at the long standing issue with the LSD. He called me today and said they found a solution and that someone from the US would pick up one of the remaining units - I suppose that would be you! By the way - thank you! Last edited on 12-21-2015 05:07 pm by KICHR |
|||||||||||||
| ||||||||||||||
| Current time is 09:29 am | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > Limited Slip Differential anyone? | Top |
