Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Changing the Engine

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Changing the Engine  Rate Topic 
AuthorPost
 Posted: 11-16-2014 11:38 am
  PM Quote Reply
1st Post
Barthol
Member
 

Joined: 10-31-2013
Location: Denmark
Posts: 67
Status: 
Offline
 Hi
I am exchanging my 2.0 907 engine with a later 2,2 907 engine.
My question is tabour the extra CW connection stud I have on the new engine on the rear right of the cylinder head.

Am i supposed to connect this stud to the Cabin heater?
On the old engine the Cabinheater was connected to a stud on the Inlet manifold ( Stromberg)

New engine is using Dellortoes, and that manifold do not have the CW connection for the Cabin heater.

one more photo in next post
BR kim

Attachment: FullSizeRender-2.jpg (Downloaded 128 times)
Back To Top PM Quote Reply  

 Posted: 11-16-2014 11:39 am
  PM Quote Reply
2nd Post
Barthol
Member
 

Joined: 10-31-2013
Location: Denmark
Posts: 67
Status: 
Offline
 2nd photo of old engine

Attachment: FullSizeRender-1.jpg (Downloaded 128 times)
Back To Top PM Quote Reply

 Posted: 11-16-2014 11:41 am
  PM Quote Reply
3rd Post
Barthol
Member
 

Joined: 10-31-2013
Location: Denmark
Posts: 67
Status: 
Offline
 Engine coming out

Attachment: FullSizeRender-8 kopi.jpg (Downloaded 128 times)
Back To Top PM Quote Reply  

 Posted: 11-16-2014 11:42 am
  PM Quote Reply
4th Post
Barthol
Member
 

Joined: 10-31-2013
Location: Denmark
Posts: 67
Status: 
Offline
 Empty engine bay ready for cleaning

Attachment: FullSizeRender-5 kopi.jpg (Downloaded 128 times)
Back To Top PM Quote Reply

 Posted: 11-16-2014 04:36 pm
  PM Quote Reply
5th Post
NigelK
Member
 

Joined: 07-16-2014
Location:  
Posts: 200
Status: 
Offline
 Hi "Barthol"

Please see page 30 of the attached. On Lotus 907 engines later than spec 3, they moved the water outlet from the back of the inlet manifold to the rear of the cylinder head, in order to address a pre-detonation issue they were having on cylinder 4.

I believe this outlet should be connected to the heater. The other heater hose connection is to a t-piece off the bottom hose just behind the fan.

Hope this helps.

Best wishes,
Nigel

http://www.lotusbits.com/improving_your_lotus.pdf
Back To Top PM Quote Reply  

 Posted: 11-17-2014 07:02 pm
  PM Quote Reply
6th Post
Barthol
Member
 

Joined: 10-31-2013
Location: Denmark
Posts: 67
Status: 
Offline
 Hi Nigel,

This was as suspected, thanks a lot for the confirmation.

BR
Kim
Back To Top PM Quote Reply

Current time is 05:28 am  
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Changing the Engine Top


UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems