| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| runs very bad when engine | Rate Topic |
| Author | Post |
|---|
| Posted: 04-05-2011 06:39 am |
|
1st Post |
|
lonnie Member
|
After driving for about 1/2 hour engine stalls and cant drive very fast. Back fires too what should i check
|
||||||||||||||
| |||||||||||||||
| Posted: 04-06-2011 02:19 pm |
|
2nd Post |
|
Brett Gibson JH5 20497 Member
|
sounds like you need get the timing set, go thru the ignition and making sure what you have is good and in working order, plugs, points, wire's, cap rotor, good grounds etc etc. then if you still are having trouble check the condition of the carbs maybe it's time for a rebuild. Brett
|
|||||||||||||
| ||||||||||||||
| Posted: 04-06-2011 08:00 pm |
|
3rd Post |
|
dwalls1 Member
|
If this repeats itself after a cooling off. ie runs ok for 1/2 hour then stalls etc. I would check the fuel pump and fuel filter.
|
||||||||||||||
| |||||||||||||||
| Posted: 04-06-2011 08:59 pm |
|
4th Post |
|
lonnie Member
|
you happen to know where the tube coming from the back carb i think its from the manifold the tubeis hanging and cant seem to find a place to hook it up to. Also on my distrubtor there is a rubber 90degree rubber and nothing attached to it. thanks for your help
|
|||||||||||||
| ||||||||||||||
| Current time is 10:20 pm | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > runs very bad when engine | Top |
