Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Intermediate shaft assembly to drive distributor

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Intermediate shaft assembly to drive distributor  Rate Topic 
AuthorPost
 Posted: 10-25-2008 03:19 pm
  PM Quote Reply
1st Post
dthewlis
Member
 

Joined: 10-01-2007
Location: Dow's Prairie, California USA
Posts: 72
Status: 
Offline
We badly need an exploded illustration or a picture of the intermediate shaft assembly and housing (the shaft that drives the distributor).

On my car the shaft has a lot of play at one end and the housing is being damaged.  When we took the housing apart, we found the shaft with a gear (which has a washer and nut). But my mechanic believes there should be a thrust washer or something to hold the shaft in place so there isn't any play, and there isn't any such thing.

So we need to know what is supposed to be there.  We don't know if we are wrong, if the assembly was done incorrectly at some point in the past, if a missing washer has worn away...

If anyone can supply an exploded view, or a usable picture, I'd be delighted!  If a fax is easiest that's fine: to 415-946-3454.

Thanks very much!

Dave Thewlis

Back To Top PM Quote Reply  

 Posted: 10-25-2008 03:48 pm
  PM Quote Reply
2nd Post
Greg Fletcher
Administrator


Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 430
Status: 
Offline
There's a diagram on page A14 of the Parts Catalogue Supplement, I'll fax over a copy. It's basically a shaft with a rotor that rides in the housing. The key to keeping all this together are the front and rear circlips on the shaft. If these fail or loose enough tension, then everything will go south very quickly. There is no thrust washer in the assembly. The only adjustment is by changing the body to housing gasket, or by actually filing the housing slightly to compensate for high mileage.

Back To Top PM Quote Reply

 Posted: 10-25-2008 03:52 pm
  PM Quote Reply
3rd Post
dthewlis
Member
 

Joined: 10-01-2007
Location: Dow's Prairie, California USA
Posts: 72
Status: 
Offline
Ahah!  So we were wrong. I'll look for the fax, thank you very much.  And I see a copy of the Parts Catalogue Supplement in my immediate future...

Back To Top PM Quote Reply  

Current time is 05:25 am  
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Intermediate shaft assembly to drive distributor Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems