| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| 4 Speed Jumping out of third gear | Rate Topic |
| Author | Post |
|---|
| Posted: 03-19-2008 04:19 pm |
|
1st Post |
|
Frank Schwartz Guest
|
Somewhere I read that there was a "fix" for a 4 speed jumping out of third or second gear. Something about a tailstock nut coming loose and needing to be tightened up.... Can anyone help me out on this? My son's JH does this and I have never been "into" a JH 4 speed tranmisssion and need to know what I can do to stop this problem. Regards to all...
|
||||||||||||||
| |||||||||||||||
| Posted: 03-20-2008 06:36 pm |
|
2nd Post |
|
Greg Fletcher Administrator 
|
You need pull the drive shaft off and remove the tail shaft from the transmission. That typically won't cure this issue, but worth investigating, as it's more likely you simply have worn gears. What's the mileage on this thing? The primary shaft has a 1 1/8 inch nut at the back of the main shaft. Most people don't torque and stake this nut correctly when they tear down the box at rebuild time and big problems happen later as a result. I have a very difficult time getting this tightened and staked to the shaft at the recommended 80 lbs with the shaft in a vise on the bench.
|
|||||||||||||
| ||||||||||||||
| Current time is 05:09 am | |
| > Jensen Healey & Jensen GT Tech > Engine & Transmission > 4 Speed Jumping out of third gear | Top |
