| Moderated by: Greg Fletcher | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Rdinstel Member
|
I recently purchased a fuel tank for my 1974 Jensen Healey Mark II from Compbrake in England. Unfortunately the sending unit leaks. I emailed Compbrake and am waiting to hear back, but wondered if anyone had any idea of who else may have a unit that would fit the Compbrake tank? Just this morning I contacted Mike at Delta, hopefully he has some ideas - he has been very helpful in the past. Ray |
|||||||||
|
redracer Member
|
Sorry you purchased that: I had written this past year about this, and they are poorly designed. Martin Robey's one, although a little more expensive, would have been MUCH better with NO hassling. Here is the write up I did along with other's comments in this forum" http://www.jensenhealey.com/forums/view_topic.php?id=2790&forum_id=14&highlight=redracer%2C+gas+tank |
|||||||||
|
Rdinstel Member
|
Thanks for much for getting back to me so fast. I wish I had read your post earlier. Do you have contact info for Martin Robey? Ray |
|||||||||
|
redracer Member
|
https://www.martinrobey.com/ Since you are now "STUVCK" with this fuel tank, in that article I attached, you should find a decent sending unit info as well as the stuff I had to modify to make it work. We had contacted this supplier of this poorly designed tank with no luck, but maybe you will have better luck??(doubt it) |
|||||||||