| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Gas cap to neck gasket | Rate Topic |
| Author | Post |
|---|
| Posted: 11-18-2013 04:27 pm |
|
1st Post |
|
Art DeKneef Member
|
Anyone know of a replacement or substitute. Delta does not have this piece. There is no replacement number in the catalog/parts list. The flip-up gas cap has a gasket/sealer underneath held on by a screw. Underneath the gasket is a spring to provide tension against the neck to help provide a good seal. It looks like it's made by pressing two pieces of metal together with a rubber gasket between and exposed on the ends. Thought I would ask before I start searching.
|
||||||||||||||
| |||||||||||||||
| Posted: 11-19-2013 08:18 pm |
|
2nd Post |
|
Brett Gibson JH5 20497 Member
|
Art, I would go to Mcmaster-Carr and buy a piece of gasket material that is gasoline compatable and just cut your own using the old one as a template. Brett
|
|||||||||||||
| ||||||||||||||
| Posted: 11-20-2013 01:12 am |
|
3rd Post |
|
Art DeKneef Member
|
That's what I am doing. I got around to really looking at it and discovered it is two pieces of metal pressed fit together and holds the rubber gasket in place. Pretty simple actually. Just have to get the rubber sheet and cut out the gasket.
|
||||||||||||||
| |||||||||||||||
| Current time is 05:40 am | |
| > Jensen Healey & Jensen GT Tech > Fuel Stuff > Gas cap to neck gasket | Top |
