| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Gas tank | Rate Topic |
| Author | Post |
|---|
| Posted: 09-08-2013 11:32 pm |
|
1st Post |
|
scottsmi Member
|
Just wondering what club members used in the trunk under the gas tank. My Jensen didn't have anything in it but a badley rusted tank sitting on the metal. I was thinking about someway to allow air under tank to prevent rust. Any thoughts?
|
||||||||||||||
| |||||||||||||||
| Posted: 09-09-2013 06:50 am |
|
2nd Post |
|
answerman Member
|
I remember someone once mentioning taking a couple of lengths of rubber fuel line and using them as standoffs. That's something I will be looking at this winter when Ms. J gets her makeover.
|
|||||||||||||
| ||||||||||||||
| Posted: 09-09-2013 03:00 pm |
|
3rd Post |
|
Jensen Healey Super Moderator 
|
A used toothed cam belt has been mentioned in the past.
|
||||||||||||||
| |||||||||||||||
| Posted: 09-09-2013 10:55 pm |
|
4th Post |
|
Ron Mau Member
|
I used a couple of rubber bungee cords. Seems to work ok
|
|||||||||||||
| ||||||||||||||
| Posted: 03-22-2015 10:30 pm |
|
5th Post |
|
Jensenman Member
|
I got a pair of those thick rubber splash guards for a pickup and cut approx 1" wide slices. http://www.northerntool.com/shop/tools/product_200316137_200316137 Painted the outside of the tank then glued 5 of these strips to the underside and reinstalled the tank. You might also want to reseal the fill neck grommet to slow down water getting into the trunk.
|
||||||||||||||
| |||||||||||||||
| Current time is 02:02 pm | |
| > Jensen Healey & Jensen GT Tech > Fuel Stuff > Gas tank | Top |
