Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Fuel type  Rating:  Rating
AuthorPost
 Posted: 07-12-2013 02:34 pm
  PM Quote Reply
1st Post
Rob Rawe
Member
 

Joined: 08-17-2007
Location:  
Posts: 19
Status: 
Offline
J.H. shop manual has no reference to fuel octane rating that I can find.

Can some one tell me what is recommended?

JH #14120

Back To Top PM Quote Reply  

 Posted: 07-12-2013 06:57 pm
  PM Quote Reply
2nd Post
answerman
Member
 

Joined: 09-10-2012
Location: Little Chute, Wisconsin USA
Posts: 435
Status: 
Offline
I'm pretty sure that my owners manual specifies a minimum of 91 octane. Plus, for whatever it's worth, "premium" is usually ethanol free, which is important in a car of the JH's vintage as the ethanol can cause havoc with the fuel system and seals and such.

Back To Top PM Quote Reply

 Posted: 07-16-2013 10:08 am
  PM Quote Reply
3rd Post
subwoofer
Member
 

Joined: 04-01-2008
Location: Sandefjord, Norway
Posts: 617
Status: 
Offline
The stock JH 907 has next to no compression (8.5:1) and still fast combustion chambers, so octane rating is not likely to be an issue. I run a higher compression 907 (9.4:1) from a Lotus Eclat and see no issues on regular 95RON. My VW flat-4 in the family barge has 10.5:1 compression, slower chambers and still runs with no issues on 95RON...

But beware of alcohol content, since it eats gaskets and fuel lines if they are not compatible, and fuel lines from the 70's are most likely not!

--
Joachim

Back To Top PM Quote Reply  

 Posted: 07-16-2013 10:34 pm
  PM Quote Reply
4th Post
Jim Ketcham
Member
 

Joined: 03-13-2005
Location: Salt Point, New York USA
Posts: 208
Status: 
Offline
Remember that the JH manual specifies RON. In the US the octane rating on the pump is (R+M)/2., that is, the average of the Research Octane Number ( RON) and the Motor Octane Number (MON). Since the MON for typical fuels is about 8 numbers lower than the RON, US "regular" at 87 (R+M)/2 should meet the 91 RON requirement as specified in the JH manual.
JH fuel lines are steel and should be okay with ethanol. Aluminum and certain elastomers do not seem to like ethanol, but I have not experienced any problems with E10 (10% ethanol) which is what we see in the US (in all grades) in non-compliance areas.

Back To Top PM Quote Reply

Current time is 04:59 pm  
> Jensen Healey & Jensen GT Tech > Fuel Stuff > Fuel type Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems