| ||||
> Jensen Healey & Jensen GT Tech > VIN Database for Jensen Healey & Jensen GT > Jensen Healey & Jensen GT VIN Database |
| ||||
> Jensen Healey & Jensen GT Tech > VIN Database for Jensen Healey & Jensen GT > Jensen Healey & Jensen GT VIN Database |
| Moderated by: Greg Fletcher | Page:   ... 4 5 6 7 8 9 10 11 12 13 14 ...   |
|
|||||||||||||
| Jensen Healey & Jensen GT VIN Database | Rating: 
|
| Author | Post |
|---|
| Posted: 01-04-2012 01:53 am |
|
161st Post |
|
JodyKerr Member 
|
None of my notes have the measurements for that specific bolt. I do know that it's the exact same one as the one that holds the windshield wiper motor under the dash. If noone else chimes in I'll bring one to Ace and measure it on my next trip.
|
||||||||||||||
| |||||||||||||||
| Posted: 01-05-2012 06:48 am |
|
162nd Post |
|
sholdowa Member 
|
Thanks for that. At the moment I've got a home made hard top on it, and I really don't like it. If there are any patterns for a tonneau cover, I'll give that a go as well. PS. It's 1/4" UNF. Last edited on 01-07-2012 01:01 am by sholdowa |
|||||||||||||
| ||||||||||||||
| Posted: 01-07-2012 05:07 pm |
|
163rd Post |
|
Bob 13902 Member
|
1973 Yellow/Black Interior, Chrome bumpers VIN#13902; Engine B74 11 10 146 Restoration completed 2006 Engine complete rebuild with performance modifications March 2012 (Dellorto 45 conversion, Hi compression +0.030 pistons, 107 cams, oversize stainless valves, port match/polish, Green Dot HTD pulleys, ceramic coated headers) Last edited on 05-08-2012 12:06 am by Bob 13902 |
||||||||||||||
| |||||||||||||||
| Posted: 02-17-2012 12:31 pm |
|
164th Post |
|
theonlyiceman53 Member
|
Jensen GT 30224, Still in cleanup, replacing brake system and fuel system. 6815 Miles! Interior like new with Paisley inserts. White exterior. Amazing how dirty it is from just sitting! Tampa Bay, Florida Attachment: IMG_3357.JPG (Downloaded 532 times)
|
|||||||||||||
| ||||||||||||||
| Posted: 02-18-2012 10:47 pm |
|
165th Post |
|
Sander Member 
|
Ummm .... very interesting inserts, but I don't believe they are original. Show us more pictures of the car too please!
|
||||||||||||||
| |||||||||||||||
| Posted: 02-18-2012 11:45 pm |
|
166th Post |
|
theonlyiceman53 Member
|
Yep, it's original! I think there were about 18 made with that interior option. I thought exactly the same thing when I saw it for sale. I've gotten used to it and I actually kind of like it! Bill Attachment: IMG_3353.JPG (Downloaded 513 times)
|
|||||||||||||
| ||||||||||||||
| Posted: 02-25-2012 10:33 pm |
|
167th Post |
|
LindBrosRacing Member
|
Here's the VIN for the Lind Bros Jensen Healey collection with their VINs. Sorry I don't have all the info, but here's what I have for today... VIN: 11280 Lee Mueller's racecar, restored and back to vintage racing. Vin: 19262 Left over from Lind Bros Motors. Kept by my uncle in the garage for a while to decay. Cleaned up in 2002 by my dad and I and now in great running condition. Vin: 13734 Purchased in 2011 in Columbus, OH with a Rover V8 engine swap. We're currently restoring it and hope to have it back on the road by the spring.
|
||||||||||||||
| |||||||||||||||
| Posted: 03-08-2012 03:46 pm |
|
168th Post |
|
George Member
|
Hello everyone. Despairing of ever getting my Interceptor on the road and regretting selling my JH5, I purchsed a GT (VIN 30242). Needed a little work to make roadworthy, but rust free (from AZ) and now ready for summer driving (I hope). Its a metallic green with o.k. paint job, looks good from a few feet, but has some runs and overspray. It is really nice to work on a car from a salt free zone - all the old nuts and bolts just come apart like they're supposed to! Hope to post pics soon. Thanks to Greg and all the posters for your past help and I hope to get the car to 2012 Jensen East. George
|
|||||||||||||
| ||||||||||||||
| Posted: 03-09-2012 08:49 pm |
|
169th Post |
|
jgreen Member
|
Jensen GT SN 30281, " BUTTERSCOTCH PUDDING" or Miss "B" 26,000 miles... all original except the following mods: 910 Cam towers NOS Leather interior from England Vintage air - Heating and airconditiong system Pete's kit 5 Speed bushing upgrade, and driveshaft. Carpithian Elm Burl Dash by Madera Electric fan in addition to regular fan Upgraded radiator. Blue tooth Stereo Brett Gibson overhauled the Carbs, fuel system, Tuned the engine, fixed some light rust and overhauled the electrical system with such detail it works like new! Thank You Brett! Attachment: after1.jpg (Downloaded 457 times) Last edited on 03-09-2012 08:54 pm by jgreen |
||||||||||||||
| |||||||||||||||
| Posted: 03-10-2012 02:54 pm |
|
170th Post |
|
Mason Jones Member 
|
jgreen wrote: Vintage air - Heating and airconditiong system Which Vintage Air system did you install? Would you recommend it? That's on my "someday" list. Mason
|
|||||||||||||
| ||||||||||||||
| Posted: 03-10-2012 08:26 pm |
|
171st Post |
|
jgreen Member
|
Mason, Yes, its called a Vintage Air Generation II mini system. It works great. When my factory air was not working, I took it to the airconditioning shop and this looked like my best option. Option 1- Replace the entire system with NOS parts from Rejen in england or Option 2 - Replace entire system with vintage air system. Both systems cost about the same but the advantage of the Vintage air system is the air conditioning will blow ice chunks in your face with plenty of air movement and power where the original system can barely cool the car. The system replaces EVERYTHING under the dash and in the engine compartment. It handles heat, and defrost as well Here's the process the pros did...they have installed 100's of these systems: 1) Remove the compressor, hoses, temp switch, evaporator/drier and big black thing in the engine compartment next to the firewall. 2) remove dash and send to madera to refinish.... they will also modify the center dash to accept the new control panel and cover unused switches. 3) rip out the dash hoses and the airconditioning/heater box. 4) cut out small area of the firewall and set up new unit with the mounting bracket..... install vintage air dash hoses and new vents when the dashcomes back from madera 5)install new compressor, hoses,drier, evaporator.... seal up hole with new steel where big black thing was as it is no longer needed. 6) the pros recommended I install an electric fan in addition to the engine driven fan. 7) adjust the servos ..... they electronically move the dampners....no more cables or levers. seems to work great! I have a bunch of pictures documenting the entire process which i can send to you if are interested. John
|
||||||||||||||
| |||||||||||||||
| Posted: 04-05-2012 05:08 pm |
|
172nd Post |
|
ajm541s Member
|
Vin /10004, HEA 4K, is at last nearing completion after protracted nut and bolt rebuild. Car will feature as a 'work in progress' exhibit at the Bristol Classic Show, April 21/22,, Shepton Mallet, UK. Note for Greg: Tried to rejoin on line without success, no link made between form and Paypal. Tony Marshall tonymarshall138@yahoo.co.uk
|
|||||||||||||
| ||||||||||||||
| Posted: 04-05-2012 08:11 pm |
|
173rd Post |
|
Jensen Healey Super Moderator 
|
Hi Tony, Is this the 4th Jensen Healey built?
|
||||||||||||||
| |||||||||||||||
| Posted: 04-06-2012 08:37 am |
|
174th Post |
|
ajm541s Member
|
Actually the second car off the line, following the Geneva Show car. It was the first Press Car and featured in the Autocar road test of August '72
|
|||||||||||||
| ||||||||||||||
| Posted: 04-06-2012 04:42 pm |
|
175th Post |
|
Dakota123 Member
|
That's amazing! Any pictures to post? How did you come by it? Mike 10628
|
||||||||||||||
| |||||||||||||||
| Posted: 04-06-2012 05:36 pm |
|
176th Post |
|
ajm541s Member
|
Presssed the wrong button while on Ebay! Seriously, I had been looking for it for a while and then someone told me it was on Ebay, this was in 2005. I had used the car at the factory when it was not out with the press, and then sold it to my uncle in 1973. He sold it on fairly quickly, claiming he was constantly being persued by the police for speeding! History shows about 12 other owners and it was in a dreadful state when I bought it. I will write the story when it is finished, which should be sometime this summer. Bodywork is practically done and is painted, just a few panels to fit at the front, engine etc in but not connected up, front and rear suspension restored with Spax and poly bushes. So not much more to do? Took me all this morning to fit one door handle! But I did take time to make a template for the gasket that fits between handle and door, making it out of pool lining material; or one who is naturally ham fisted, this has worked out quite well. Unfortunately all the pics I have are too big to show here, that is until I can find a way. More anon. Last edited on 04-07-2012 11:11 am by ajm541s |
|||||||||||||
| ||||||||||||||
| Posted: 06-06-2012 05:04 am |
|
177th Post |
|
Art DeKneef Member
|
Update on my cars from a post from 2006. Has it really been that long? 12768 is still here. 17500 was stripped of all usable parts and the rusted out chassis was recycled. 19658 is still under going a complete restoration but at least I am now putting it back together while making some modifications and updates. 30395 - A Jensen GT, ended up being rusted too far to be worth fixing up so I removed all the usable parts and scrapped the body. 14539 was recently purchased and currently getting cleaned up and fixed. The last owner decided he wanted to put a Ford 4 cylinder in and then lost interest. He sold the engine and trans. In order to accommodate the Ford engine he modified the front crossmember engine mounts and made a few other small modifications. Effectively making the crossmember useless for the 907 engine. Plus he took a perfect hood and cut a big hole in it, making that useless also. Otherwise the car is in good shape. The plan is to take the engine, 5-speed trans and front suspension from 19658 and get a running car. Hopefully within a few months, since it is summer here in Arizona and the car is outside. Though it is under some shade cloth as I work on it. So it isn't too bad as long as I work in the early morning. Like before 9:00 AM. Last edited on 06-06-2012 05:05 am by Art DeKneef |
||||||||||||||
| |||||||||||||||
| Posted: 07-27-2012 06:27 pm |
|
178th Post |
|
GWest Member
|
1973 Jensen Healey MK1 #11259 Engine B73 01 1395 (original) with spare engine T 75 02 11313 currently undergoing rebuild. I have owned this car since 1975 originally sold in Orlando Florida currently residing in Portland Oregon. JH is a 2.0 with 40 DCOE Webers. Regards Greg West
|
|||||||||||||
| ||||||||||||||
| Posted: 09-10-2012 08:57 pm |
|
179th Post |
|
answerman Member
|
Howdy everyone... a new club member here. This weekend I took possession of JH 16173. It's at home so I don't have the engine number handy. Looking forward to the trials and tribulations of bringing her back to a respected status. It's a 1974 MkII, must be early from what I've been able to figure out (has the stainless trim over the bumpers and the rounded headlight pods). Red (which has at least been oversprayed in spots if not completely repainted, you can see it on the plate on the drivers door in the photo) with a tan interior. She runs OK, drives OK, and isn't in horrible shape (actually looks great from a distance) but needs the usual floor and rocker work. The interior is in great shape, not a rip or tear anywhere, which makes me wonder if it's not original. The convertible top has been replaced fairly recently and the seller also had the factory hardtop, original JH owners manual (complete with foldout wiring diagram inside the back cover), shop manual, and all the receipts from the past 10 years or so. I'm feeling pretty good about her. Appleton, WI if anyone else is in the area... Attachment: JH16173-1-800.jpg (Downloaded 315 times) Last edited on 09-10-2012 09:15 pm by answerman |
||||||||||||||
| |||||||||||||||
| Posted: 09-25-2012 11:57 am |
|
180th Post |
|
ajm541s Member
|
1110/16173, engine B74.03.6527 Left the factory 17 April '74 Enjoy! Tony M HEA 4K 1140/10004
|
|||||||||||||
| ||||||||||||||
| Current time is 04:42 pm | Page: ... 4 5 6 7 8 9 10 11 12 13 14 ... |
| > Jensen Healey & Jensen GT Tech > VIN Database for Jensen Healey & Jensen GT > Jensen Healey & Jensen GT VIN Database | Top |
