| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| New Addition | Rate Topic |
| Author | Post |
|---|
| Posted: 09-28-2010 06:18 pm |
|
1st Post |
|
sicone56 Member
|
I found 19269 at a storage unit in Rockford, Il. Bought her in Feb 2010 and have been bringing her back to life ever since. The build date is 11/12/74 with motor #B74119980 and currently have her at Rock Island Arsenal auto craft shop. 19269 came with black paint and tan interior, 5 speed and lots of rust. I have started at the front and have worked my way to the back replacing everything from bushings, springs, shocks, nuts and bolts, replaced top end on motor, pans, rockers and the list goes on. Hopefully through this forum I can find out where 19269 has been. Thanks to everyone from here for all the help.
|
||||||||||||||
| |||||||||||||||
| Posted: 09-29-2010 08:08 pm |
|
2nd Post |
|
Ron Mau Member
|
I'm In Davenport, IA. If you need anything for your rebuild let me know. Or if you need to compare notes. Ron Mau 16763
|
|||||||||||||
| ||||||||||||||
| Posted: 10-03-2010 11:33 pm |
|
3rd Post |
|
sicone56 Member
|
thanks Ron, I am looking for a few things. where in Dport? maybe we could meet somewhere and talk shop. 309-230-1317
|
||||||||||||||
| |||||||||||||||
| Posted: 10-07-2010 02:21 pm |
|
4th Post |
|
sicone56 Member
|
Does anyone know of a rear brake conversion to disk?
|
|||||||||||||
| ||||||||||||||
| Posted: 10-07-2010 04:37 pm |
|
5th Post |
|
Jensen Healey Super Moderator 
|
Try this old thread: http://www.jensenhealey.com/forums/view_topic.php?id=1112&forum_id=6&highlight=volvo Kurt
|
||||||||||||||
| |||||||||||||||
| Posted: 10-07-2010 09:18 pm |
|
6th Post |
|
sicone56 Member
|
Thanks Kurt, I'll give it a whirl.
|
|||||||||||||
| ||||||||||||||
| Posted: 10-07-2010 10:57 pm |
|
7th Post |
|
Dakota123 Member
|
Try Norm Vandal as well, vandal@tds.net. I believe he has a kit developed. http://www.jensenhealey.com/forums/view_topic.php?id=502&forum_id=6&jump_to=3562 Mike
|
||||||||||||||
| |||||||||||||||
| Posted: 10-08-2010 07:34 pm |
|
8th Post |
|
sicone56 Member
|
Thanks Mike appreciate the info. I can't seem to find replacement springs for the Lockheed brake set up thats why I may have to go to the disc set up. Thanks again.
|
|||||||||||||
| ||||||||||||||
| Posted: 10-12-2010 04:22 pm |
|
9th Post |
|
Jensen Healey Super Moderator
|
Which springs are you missing? I have a Lockheed setup on the bench. I could take the springs to my parts house and try to match them. Kurt
|
||||||||||||||
| |||||||||||||||
| Posted: 10-13-2010 06:43 pm |
|
10th Post |
|
sicone56 Member
|
Hey Kurt, I'm looking for the LH & RH tension and pull off springs. I have been looking for the last couple of weeks and can't seem to find a good match. Either the spring tension is off or the re-fab won't work. 19269 is winding down and as always it's the little big things that take the longest. thanks for the help Gus
|
|||||||||||||
| ||||||||||||||
| Posted: 10-13-2010 11:51 pm |
|
11th Post |
|
Jensen Healey Super Moderator
|
So you have some springs to compare to? The springs I'm using were rusty but cleaned up well on the wire wheel. Kurt Several thoughts: There must be some other cars out there that have Lockheed drum brakes in the same size. The '75- '79 MG Midget with 9" brakes look right in the drawings but I can't confirm they are Lockheed or locate a spring kit for them. Spring manufacturers are willing to do short runs. We may have to get a quote. Last edited on 10-14-2010 04:41 pm by Jensen Healey |
||||||||||||||
| |||||||||||||||
| Posted: 10-14-2010 08:10 pm |
|
12th Post |
|
Jensen Healey Super Moderator
|
Hi Gus, I sent you a message. I am now 90% sure the '75 to '79 MG Midget springs won't fit. My local parts house (now owned by Napa) recently loaded two dumpsters with Lucas parts and disposed of them. The local LBC mechanics weren't even informed before it happened. Kurt Last edited on 10-21-2010 12:38 am by Jensen Healey |
|||||||||||||
| ||||||||||||||
| Posted: 10-18-2010 07:00 pm |
|
13th Post |
|
sicone56 Member
|
Okay Folks here's one for you, while securing the timing belt locknut the timing belt bolt started coming out of the block, yeah that's probably a bad thing. Anyone have a solution? It seems the whole plug and bolt is separating from the block............jeezzz
|
||||||||||||||
| |||||||||||||||
| Posted: 10-18-2010 07:13 pm |
|
14th Post |
|
Brett Gibson JH5 20497 Member
|
clean it and free up the nut while out, check the bearing to, put it back in with a dab of lock-tite. Brett
|
|||||||||||||
| ||||||||||||||
| Posted: 10-18-2010 08:24 pm |
|
15th Post |
|
sicone56 Member
|
Thanks Brett, The problem really isnt the nut, the bolt and aluminum plug inside the block is coming out. I just did a top end because the timing belt broke and crushed some valves so i feel i may have overtightened the retaining nut when i put it back together. I dont want to redo the motor again, that would cause a significant emotional event.......
|
||||||||||||||
| |||||||||||||||
| Posted: 10-18-2010 10:55 pm |
|
16th Post |
|
Ron Mau Member
|
Is it actually the bolt? The tightening nut will come out of the block with the bearings and the tensioner. If teh stud it self is come out you can try to tighten it with a jam nut or it may need to be helicoiled or retapped. Worse case scenerio. Call if you need to 563-322-2854 Ron Mau
|
|||||||||||||
| ||||||||||||||
| Current time is 06:19 pm | |
| > Jensen Healey & Jensen GT Tech > VIN Database for Jensen Healey & Jensen GT > New Addition | Top |
