| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| MK1 Lug nut size and or source for a replament set | Rate Topic |
| Author | Post |
|---|
| Posted: 01-13-2018 04:42 pm |
|
1st Post |
|
Mondial1 Member 
|
Does anyone know the thread size/pitch for the MK1 lug nuts? any listed sources for replacement - Aluminum Lug nuts? Thanks!
|
||||||||||||||
| |||||||||||||||
| Posted: 01-14-2018 03:36 pm |
|
2nd Post |
|
redracer Member
|
the threads are 7/16" X 20 threads/inch(the "fine" size for 7/16" bolts). The lug nuts(aluminum) have a tapered raised edge near the shoulder to allow for centering of the wheel(always loosely tighten the 4 nuts to center the wheel before using the torque wrench). If you need extra nuts, I have plenty.(eventually I'll get a bunch powder coated for longer lasting "beauty")
|
|||||||||||||
| ||||||||||||||
| Posted: 03-26-2019 09:01 pm |
|
3rd Post |
|
JH73 Member
|
I would like to buy some lug nuts from you....I need 16...How much? 501-204-9512.
|
||||||||||||||
| |||||||||||||||
| Posted: 03-26-2019 09:03 pm |
|
4th Post |
|
JH73 Member
|
How much torque on the wheel nuts?
|
|||||||||||||
| ||||||||||||||
| Posted: 03-30-2019 08:53 pm |
|
5th Post |
|
Sander Member 
|
I believe it's 55
|
||||||||||||||
| |||||||||||||||
| Posted: 04-04-2019 04:41 pm |
|
6th Post |
|
Esprit2 Member
|
The Workshop Manual says 51 Lbs-ft (7.05 Kg-m).
|
|||||||||||||
| ||||||||||||||
| Current time is 10:35 pm | |
| > Jensen Healey & Jensen GT Tech > Wheels > MK1 Lug nut size and or source for a replament set | Top |
