| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Door interiors | Rate Topic |
| Author | Post |
|---|
| Posted: 06-11-2007 02:09 am |
|
1st Post |
|
DaveinMD Member
|
After a long time off the boards I'm back on the eternal quest to get 16984 back on the road, returing to my love of back roads and restoring marital harmony. After the major project (for me at least) of replacing the rockers and continuting the battle with the ever present rust devils I'm in the process of restoring the doors. There is little left of the non-metal bits and I had a big favor to ask... Does someone have a tracing of the fiberboard that they could send so I can cut out new ones??? I would be eternally grateful! Any suggestions as to the best material to use for them? Thanks in advance! Dave
|
||||||||||||||
| |||||||||||||||
| Posted: 06-11-2007 02:47 am |
|
2nd Post |
|
Mark Rosenbaum Member 
|
New fiberboards are available from Delta Motorsports for a reasonable price. They fit.
|
|||||||||||||
| ||||||||||||||
| Posted: 06-11-2007 03:37 pm |
|
3rd Post |
|
edward_davis Member 
|
I had good luck with the Delta Motorsports door boards, too. If you're going to make your own from scratch, though, I would suggest using something waterproof. It seems like most of the deceased door panels I've seen have come from water getting in through the backside. I've tried to make a good seal behind them with some new plastic sheeting, but it seems to me that a more permenant solution would have been to use some big sheets of stiff vinyl; some kind of plastic that has similar material properties to fiberboard. I suppose that thin sheets of properly treated plywood would also work. It seems like that's what they're always using on the Discovery channel car shows. Good luck with the restoration! Put up lots of pictures on the JHPPG so we can see, too! Edward
|
||||||||||||||
| |||||||||||||||
| Posted: 06-11-2007 05:38 pm |
|
4th Post |
|
Joel Member
|
There's someone in the UK that sells the entire interior skin. For the price I can't see futzing with it. You should be able to find it by searching the forums. If you can't find it let me know and I'll hunt it down.
|
|||||||||||||
| ||||||||||||||
| Posted: 06-16-2007 11:44 pm |
|
5th Post |
|
DaveinMD Member
|
Thanks eveyone for your replies. Guess I'll give deta a call Dave
|
||||||||||||||
| |||||||||||||||
| Current time is 02:10 pm | |
| > Jensen Healey & Jensen GT Tech > Body & interior stuff > Door interiors | Top |
