| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| GT Style Bonnet Prop | Rate Topic |
| Author | Post |
|---|
| Posted: 01-04-2006 09:44 pm |
|
1st Post |
|
Lawrence Tod Member 
|
I have aquired a GT style prop rod from Delta for instilation in 11211. My broomstick finally wore out! Anyway the prop rod came with a Destructions..I mean Instructions but as it involves drilling holes ... I wouldn't mind seeing a picture of: 1) a GT with the bonnet prop in place. 2) a picture of a Healey with replacement bonnet prop in place. Thanks in advance , and all the best for the New Year to all JHPS members.
|
||||||||||||||
| |||||||||||||||
| Posted: 02-17-2006 08:35 pm |
|
2nd Post |
|
colinw59 Member 
|
Hi I'm nearing the end of restoring my 74 JH (15851) and, like you, decided to go the GT route rather than a bent hood or broomstick. The hood on this car is straight and I want it to stay that way. I painted the hood almost 3 months ago and I'll be sanding, buffing and installing it with a few weeks. Before painting the hood, I marked out and drilled the prop hole, ditto for the radiator support panel. I can send you pics of these two areas but as the hood is not on yet ,I don't have one with the hood in it's propped position. I also made a few improvements to the prop as follows; I dispensed with the cotter pin idea. Instead threaded (3/8" UNC I think) the short angled section/stud of the prop, stoping about 3/16" short of the welded washer/collar. I then put a nylon washer on the stud end of the prop up to the washer passed the prop thru the hole I had drilled in the radiator support panel. I used another nylon washer followed by a steel washer and then finally a Nylock nut was tightened that holds the prop firmly inplace. This way there is no slack or play in the final assembly. I also domed the working end of the prop that will locate in a rubber grommet used in the hole drilled in the hood to firmly take and hold the prop. After I had modified the prop I repainted it gloss black. Let me know if you want me to send you some pics. Thanks, Colin
|
|||||||||||||
| ||||||||||||||
| Posted: 02-18-2006 03:42 am |
|
3rd Post |
|
Mark Rosenbaum Member 
|
I'd be interested in seeing the photos, probably others would, as well. If you haven't already, perhaps you could start a folder for your car on the JHP Photo Gallery, and post the photos there.
|
||||||||||||||
| |||||||||||||||
| Posted: 02-18-2006 12:03 pm |
|
4th Post |
|
Lawrence Tod Member
|
Colin W That would be briliant; (sending some pictures), thank you for the offer. I still have not drilled my holes as yet , though a number of weeks have passed since I originally posted this topic. This is the the season for tourists (visiting family) here in the Caribbean and though my family think the Jensen is beautiful they seldom find assisting on Jensen projects entertaining. So it will likely be another month before I get a chance to get work on her. Thanks again for the offer Lawrence
|
|||||||||||||
| ||||||||||||||
| Posted: 02-18-2006 03:14 pm |
|
5th Post |
|
colinw59 Member
|
Some pics of the car are in the Gallery in JH of Connecticut. Thanks, Colin
|
||||||||||||||
| |||||||||||||||
| Posted: 02-20-2006 08:00 pm |
|
6th Post |
|
Tim Knowlton Member
|
Check out my car in the pics from Massachusetts. I bought my gas bonnet struts from the guys out in San Diego, the company slips my mind presently. They work great and as i recall the template for the drill holes could have been better. Good luck!
|
|||||||||||||
| ||||||||||||||
| Current time is 04:54 pm | |
| > Jensen Healey & Jensen GT Tech > Body & interior stuff > GT Style Bonnet Prop | Top |
