| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| HELP need a piece of the top frame | Rating: 
|
| Author | Post |
|---|
| Posted: 06-14-2017 07:25 pm |
|
1st Post |
|
allstateguy Member 
|
Hi, I was putting in my new seatbelts and noticed that my convertible top frame is missing the right hand upright piece that holds the Velcro on to snug up the top on the passenger side at the rear of the window. Would anyone happen to have a "parts" top frame that this piece could be removed from? I've attached a pic of the piece I need, but it is on the driver's side. Attachment: left top velcro holder small.jpg (Downloaded 60 times)
|
||||||||||||||
| |||||||||||||||
| Posted: 06-14-2017 11:15 pm |
|
2nd Post |
|
Frank Schwartz Member
|
That piece that the velcro is attached to? And is attached to the frame by pop rivets? Left side? I may have a junk frame I can lift this off of. The velcro is sown into a sleeve shape and slipped onto the part before it is riveted to the frame, you know.. I think I got my daughter to sew up some for me...do you need that velcro piece, too?? Your pic shows the right hand side, but you need the driver's side...right? Frank
|
|||||||||||||
| ||||||||||||||
| Posted: 06-14-2017 11:58 pm |
|
3rd Post |
|
allstateguy Member
|
Hi Frank, No, that pic is actually of the driver's side, and I do need the passenger side. I have the Velcro sleeves, got the kit of them from Delta. If you have a passenger side piece I can get from you I'd really appreciate it. I've got lots of pop rivets and a gun ready to use them!
|
||||||||||||||
| |||||||||||||||
| Posted: 06-15-2017 01:22 am |
|
4th Post |
|
Frank Schwartz Member
|
Yes, I can get you that part...but it will be next week...I am going in the morning to the hospital for some heart work and possibly a pacemaker...but in the meantime send me via email your regular mailing address..and send this to me at mfsjr2@comcast.net off this group. Frank
|
|||||||||||||
| ||||||||||||||
| Posted: 06-15-2017 01:24 am |
|
5th Post |
|
Frank Schwartz Member
|
One more thing...you are in Phoenix and there is a wheel manufacturer there that makes wheels that fit the JH..are you familiar with them? Frank
|
||||||||||||||
| |||||||||||||||
| Posted: 06-15-2017 02:57 am |
|
6th Post |
|
allstateguy Member
|
Frank Yes I'm in Phoenix. Not familiar with any British wheel makers. I remember a cycle shop in Central Phoenix that did a lot of the Harley/Triumph lacing. But that was many years ago.
|
|||||||||||||
| ||||||||||||||
| Posted: 06-15-2017 03:03 am |
|
7th Post |
|
allstateguy Member
|
I wish you the best inre surgery.
|
||||||||||||||
| |||||||||||||||
| Posted: 06-15-2017 05:49 am |
|
8th Post |
|
Randallclary@icloud.com Member
|
The manufacturer of the wheels is VTO. I purchased a seet of the 15" wheels and absoutely love them Here is the link. They also provide the 13 " wheels. Copy and paste the following link. http://www.vtowheels.com/Classic-8-Wheel-15-x-6-Silver-With-Machined-Lip-4-x-1016mm-15mm_p_341.html I tried to improve and lower my top end RPM by going with a larger diameter tire that still does not rub. I was able to max out at 195-60-15 on the front and 205-60-15 on the rear. The car looks great and I dropped RPM at 69 mph down to 3500 RPM. I have a Mark 1 with a 4 speed. The pics of the completed car are on my New Restoration Project for 13046.
|
|||||||||||||
| ||||||||||||||
| Posted: 06-15-2017 06:10 pm |
|
9th Post |
|
redracer Member
|
we have found the velcro to not be sufficient to hold the side of the top on when the windows are down, not to mention how quickly it deteriorates. Instead, we put 2 snaps on the metal "velco" piece for much better support. If Frank or whomever doesn't come up with one, I gues I could take one off the many ones I have(it is very easy to "make" this metal strip) bruce madden
|
||||||||||||||
| |||||||||||||||
| Posted: 06-15-2017 06:52 pm |
|
10th Post |
|
allstateguy Member
|
I would have made it, but I thought the spring steel it is made from isn't in my cache of materials.
|
|||||||||||||
| ||||||||||||||
| Current time is 12:08 pm | |
| > Jensen Healey & Jensen GT Tech > Body & interior stuff > HELP need a piece of the top frame | Top |
