| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Adhesive for Delta window wipes? | Rate Topic |
| Author | Post |
|---|
| Posted: 04-30-2014 07:13 pm |
|
1st Post |
|
answerman Member
|
Got my big box o'parts from Delta yesterday, and Mike mentioned that the interior window wipes (the ones that attach to the inside door panels) were going to need to be glued on instead of being fastened the way the originals were. Who's done this? I'm looking for a recommendation of what glue to use.
|
||||||||||||||
| |||||||||||||||
| Posted: 04-27-2017 01:12 am |
|
2nd Post |
|
allstateguy Member 
|
I realize that this post is way old, but . . . I just put both the inner and outer door window wipes on with adhesive, not glue. After a lot of searching, I picked 3M 4929 VHB tape. It is thin, temperature resistant, and hella strong. They advertise it as replacing rivets so I thought I'd try it. It worked well, I pop-riveted on the chrome pieces to the tops of the door cards, then applied the adhesive strip after roughing both the trim and the rubber with sandpaper, then wiping both with isopropal alcohol. Keep pressing occasionally until the 24 hour full strength time period is over. Don't be tempted to "try it out" by tugging on it. It's been back together for weeks now, and the windows roll up and down great, without any sign of the rubbers letting go of the door or the door panel.
|
|||||||||||||
| ||||||||||||||
| Posted: 03-06-2019 04:40 pm |
|
3rd Post |
|
Ralph H Member 
|
hi thanks for the post from last year re the tape you used for the window wipes installation I am doing the same job now. Having a heck of a time finding the tape by the roll so far but will keep looking If you recall what width tape did you use? and has it held up after a year on the car? Last edited on 03-06-2019 04:41 pm by Ralph H |
||||||||||||||
| |||||||||||||||
| Posted: 03-06-2019 05:22 pm |
|
4th Post |
|
redracer Member
|
AMAZON has it in different widths: https://www.amazon.com/s?k=3M+4929+VHB+tape&ref=nb_sb_noss
|
|||||||||||||
| ||||||||||||||
| Posted: 03-09-2019 07:34 pm |
|
5th Post |
|
Ralph H Member
|
AAARRRGGGG what an ordeal I found the tape online but most sellers only deal in bulk at several hundred $ order. And on Amazon the cost for 1/2 inch by 15 foot roll is wild for shipping handling and import fees. Over $80 can.
|
||||||||||||||
| |||||||||||||||
| Posted: 03-09-2019 07:46 pm |
|
6th Post |
|
redracer Member
|
sorry; didn't realize getting it to Canada would be such a problem. If you're close to the border, have a friend order it & then pick it up(or maybe they could then ship it to you??). For the outer window strip(which goes "bad" sooner than the inner one) I still use the 7 clips. I made a tool to "lift" them up after slightly widening the clips. Applying silicone paste also helped
|
|||||||||||||
| ||||||||||||||
| Posted: 03-09-2019 07:57 pm |
|
7th Post |
|
Ralph H Member
|
I am just under an hour from the border at Calais Maine and often have parts for the Jensen, MGA or our Rialta motor home shipped to a depot there. Nice enough drive and usually quick crossing times but needs to be large enough saving to justify the cost in gas. I have salvaged as many of the window and door parts as I can from the car and a parts car so will use what is needed to "get er done" :) Last edited on 03-09-2019 07:58 pm by Ralph H |
||||||||||||||
| |||||||||||||||
| Posted: 03-13-2019 12:40 am |
|
8th Post |
|
Dick Fickey Member
|
I did both of my cars with 3M Black super weatherstrip and gasket adhesive. Worked great. Left the glass up to provide pressure until the adhesive set. No problems with the wipes coming loose.
|
|||||||||||||
| ||||||||||||||
| Posted: 03-13-2019 12:44 am |
|
9th Post |
|
redracer Member
|
I wouldn't count on it; I've used that years ago with poor results, even though they looked promising at first
|
||||||||||||||
| |||||||||||||||
| Current time is 04:44 pm | |
| > Jensen Healey & Jensen GT Tech > Body & interior stuff > Adhesive for Delta window wipes? | Top |
