| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| best way to attach a boot lid finisher | Rate Topic |
| Author | Post |
|---|
| Posted: 02-13-2012 09:15 pm |
|
1st Post |
|
chiromaster Member
|
What has been the best way to attach the boot lid finisher? Specifically the middle three holes. I have the stud plates for the other holes. I got some clips from Delta and they said to drill the hole bigger so they will fit...the hole is getting big and they still dont fit.
|
||||||||||||||
| |||||||||||||||
| Posted: 02-14-2012 08:49 am |
|
2nd Post |
|
MikeIsotech Member 
|
I managed to buy some modern plastic clips which did the job nicely. If the holes are getting too big, why not fill them in and drill new holes nearby. The location of the clips isn't that precise...
|
|||||||||||||
| ||||||||||||||
| Posted: 02-14-2012 02:23 pm |
|
3rd Post |
|
Brett Gibson JH5 20497 Member
|
If your having trouble with the clip's go to a auto body shop and have them attach the trim, the new modern clips work just as well and are easier to use and it should be a pretty cheap job. Brett
|
||||||||||||||
| |||||||||||||||
| Current time is 09:36 pm | |
| > Jensen Healey & Jensen GT Tech > Body & interior stuff > best way to attach a boot lid finisher | Top |
