JH Steering Wheel Hub Adapter does not fit my JH - Body & interior stuff

> Jensen Healey & Jensen GT Tech > Body & interior stuff > JH Steering Wheel Hub Adapter does not fit my JH

Author

Post

Joined:	12-17-2009
Location:	Hailey, Idaho USA
Posts:	83
Status:	Offline

Several months ago I purchased a Lecarra adapter kit. Advertised as NOS but clearly used it even included the original box. The part number on the box is B-35J-.

Upon installation I found that it is too large for the splines on my '73 (#12827).

Do I have the wrong adapter, am I missing a part to convert the larger splines to my column, or were there more than one column size used at the factory?

Thanks in advance,

Mitch

MikeIsotech
Member

Joined:	04-22-2010
Location:	Winchester, United Kingdom
Posts:	33
Status:	Offline

I've been researching new steering wheels for my car. B35-J is the boss for a J_H (B35 is a Vauxhall Viva, the J is for a Jensen badge I think). If you look at the boss you should see "B35" moulded into it. If it isn't there it could be that someone has put an incorrect boss in a J-H box. If that's the case, you have a good case to return it to the seller.

Mike

SpeedyMitch
Member

Joined:	12-17-2009
Location:	Hailey, Idaho USA
Posts:	83
Status:	Offline

Thanks for the excellent information Mike. The only thing on the hub/boss is "Made In France".

In your research have you identified any alternative or other source for the boss?

Thanks in advance,

Mitch

MikeIsotech
Member

Joined:	04-22-2010
Location:	Winchester, United Kingdom
Posts:	33
Status:	Offline

There's a B35-J boss for sale on eBay UK:

http://www.ebay.co.uk/itm/MOTO-LITA-B35J-Boss-Kit-hub-JENSEN-HEALEY-models-/120780007707?_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D2%26po%3DLVI%26ps%3D63%26clkid%3D2917514323890896521

Does yours look anything like it?

I'll look for the other suppliers that I found and post what I find.

Mike

MikeIsotech
Member

Joined:	04-22-2010
Location:	Winchester, United Kingdom
Posts:	33
Status:	Offline

here's another (cheaper) source for the boss:

http://www.merlinmotorsport.co.uk/p15194/Steering-Wheel-Boss-for-VAUXHALL-Viva-HB-All-Years-from-Springalex/product_info.html

unfortunately also in the UK

SpeedyMitch
Member

Joined:	12-17-2009
Location:	Hailey, Idaho USA
Posts:	83
Status:	Offline

SpeedyMitch wrote: Upon installation I found that it is too large for the splines on my '73 (#12827).
Can somebody please verify that the "standard" spline measures 5/8"?

Thanks in advance.

Attachment: JH Steering Spline Measurement.jpg (Downloaded 59 times)

Jensen Healey
Super Moderator

Joined:	03-11-2005
Location:	San Anselmo, California USA
Posts:	983
Status:	Offline

Just cut the hub out of the stock steering wheel and bolt on the new rim.

Sheesh, OK I'll go and measure. :-)

Kurt

Jensen Healey
Super Moderator

Joined:	03-11-2005
Location:	San Anselmo, California USA
Posts:	983
Status:	Offline

I measured the internal diameter of my old steering wheel and it is indeed .625", = 5/8". I had the tangs of the caliper seated in the grooves. There are 36 splines.