| ||||
> Jensen Healey & Jensen GT Tech > Body & interior stuff > JH Steering Wheel Hub Adapter does not fit my JH |
| ||||
> Jensen Healey & Jensen GT Tech > Body & interior stuff > JH Steering Wheel Hub Adapter does not fit my JH |
| Moderated by: Greg Fletcher |
|
||||||||||||||
| JH Steering Wheel Hub Adapter does not fit my JH | Rating: 
|
| Author | Post |
|---|
| Posted: 09-17-2011 03:48 pm |
|
1st Post |
|
SpeedyMitch Member 
|
Several months ago I purchased a Lecarra adapter kit. Advertised as NOS but clearly used it even included the original box. The part number on the box is B-35J-. Upon installation I found that it is too large for the splines on my '73 (#12827). Do I have the wrong adapter, am I missing a part to convert the larger splines to my column, or were there more than one column size used at the factory? Thanks in advance, Mitch
|
||||||||||||||
| |||||||||||||||
| Posted: 09-19-2011 04:41 pm |
|
2nd Post |
|
MikeIsotech Member 
|
I've been researching new steering wheels for my car. B35-J is the boss for a J_H (B35 is a Vauxhall Viva, the J is for a Jensen badge I think). If you look at the boss you should see "B35" moulded into it. If it isn't there it could be that someone has put an incorrect boss in a J-H box. If that's the case, you have a good case to return it to the seller. Mike
|
|||||||||||||
| ||||||||||||||
| Posted: 09-19-2011 04:59 pm |
|
3rd Post |
|
SpeedyMitch Member
|
Thanks for the excellent information Mike. The only thing on the hub/boss is "Made In France". In your research have you identified any alternative or other source for the boss? Thanks in advance, Mitch
|
||||||||||||||
| |||||||||||||||
| Posted: 09-20-2011 06:12 pm |
|
4th Post |
|
MikeIsotech Member
|
There's a B35-J boss for sale on eBay UK: http://www.ebay.co.uk/itm/MOTO-LITA-B35J-Boss-Kit-hub-JENSEN-HEALEY-models-/120780007707?_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D2%26po%3DLVI%26ps%3D63%26clkid%3D2917514323890896521 Does yours look anything like it? I'll look for the other suppliers that I found and post what I find. Mike
|
|||||||||||||
| ||||||||||||||
| Posted: 09-20-2011 06:19 pm |
|
5th Post |
|
MikeIsotech Member
|
here's another (cheaper) source for the boss: http://www.merlinmotorsport.co.uk/p15194/Steering-Wheel-Boss-for-VAUXHALL-Viva-HB-All-Years-from-Springalex/product_info.html unfortunately also in the UK
|
||||||||||||||
| |||||||||||||||
| Posted: 11-18-2011 03:39 pm |
|
6th Post |
|
SpeedyMitch Member
|
SpeedyMitch wrote: Upon installation I found that it is too large for the splines on my '73 (#12827). Can somebody please verify that the "standard" spline measures 5/8"? Thanks in advance. Attachment: JH Steering Spline Measurement.jpg (Downloaded 59 times)
|
|||||||||||||
| ||||||||||||||
| Posted: 11-19-2011 02:39 am |
|
7th Post |
|
Jensen Healey Super Moderator 
|
Just cut the hub out of the stock steering wheel and bolt on the new rim. Sheesh, OK I'll go and measure. :-) Kurt
|
||||||||||||||
| |||||||||||||||
| Posted: 11-19-2011 10:28 pm |
|
8th Post |
|
Jensen Healey Super Moderator
|
I measured the internal diameter of my old steering wheel and it is indeed .625", = 5/8". I had the tangs of the caliper seated in the grooves. There are 36 splines.
|
|||||||||||||
| ||||||||||||||
| Current time is 11:08 am | |
| > Jensen Healey & Jensen GT Tech > Body & interior stuff > JH Steering Wheel Hub Adapter does not fit my JH | Top |
