Markings from Engine Builder? - Miscellaneous - Jensen Healey & Jensen GT Tech -

Home

Not logged in - Login | Register

> Jensen Healey & Jensen GT Tech > Miscellaneous > Markings from Engine Builder?

Moderated by: Greg Fletcher

New Topic

Printer Friendly

Markings from Engine Builder?

Rate Topic

Author	Post

Posted: 07-22-2022 12:29 am

Quote

1^st Post

WhatsUpDOHC
Member

Joined:	10-05-2021
Location:	New Jersey USA
Posts:	51
Status:	Offline

Hi -

I'm wondering if anyone on this forum recognizes these markings on the block - Not what they refer to but who made them. I'm thinking that they are from the engine builder or whoever installed the cams and pistons.

I had to crop the picture down so much in order to attach it. I'm sure that you can recognize it but it's the area under the starter location and below the distributor on the passenger side of the block.

Does anyone recognize these or who has had an engine built with similar markings?

I'm still trying to pull together the history of the car.

Thanks,

Mark

Attachment: Builder Markings - Small.jpg (Downloaded 50 times)

Quote

Posted: 07-23-2022 04:35 pm

Quote

2^nd Post

noomg
Member

Joined:	08-02-2018
Location:	Long Beach, California USA
Posts:	452
Status:	Offline

Mark,

I'd say you're right about those marks being made by a machinist or builder after the fact. The good news it probably means your motor has been rebuilt.

Good luck trying to track down your car's history. It's very difficult these days since the DMVs no longer give out any information. Your best source of info will be the paperwork (if any) that came with the car and the seller.

I've tried to track down the history of my car and have come up with a rough lineage with a lot of holes. Unfortunately I didn't become interested in the history until a number of years after I got it and I'd lost touch with the seller.

Quote

Posted: 08-06-2022 11:36 pm

Quote

3^rd Post

WhatsUpDOHC
Member

Joined:	10-05-2021
Location:	New Jersey USA
Posts:	51
Status:	Offline

noomg wrote:
Mark,

I'd say you're right about those marks being made by a machinist or builder after the fact. The good news it probably means your motor has been rebuilt.

Good luck trying to track down your car's history. It's very difficult these days since the DMVs no longer give out any information. Your best source of info will be the paperwork (if any) that came with the car and the seller.

I've tried to track down the history of my car and have come up with a rough lineage with a lot of holes. Unfortunately I didn't become interested in the history until a number of years after I got it and I'd lost touch with the seller.

Thanks for the reply, noomg!

I was hoping that someone here would recognize the marks. I'll keep digging.

Yes, it is comforting to know that the engine has been rebuilt. Also, it has aftermarket cams (unknown grind - I'll measure when I paint the Cam covers) and what appears to be 9.5:1 pistons.

Knock wood - It's running really strong and I'm loving the car.

Also, it's getting some really good attention at the Cars and Coffees!

Mark

Last edited on 08-06-2022 11:37 pm by WhatsUpDOHC

Quote

Current time is 02:05 pm
> Jensen Healey & Jensen GT Tech > Miscellaneous > Markings from Engine Builder?	Top