Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Miscellaneous > Cleaning/degreasing the engine in place

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Cleaning/degreasing the engine in place  Rate Topic 
AuthorPost
 Posted: 03-16-2015 07:32 pm
  PM Quote Reply
1st Post
answerman
Member
 

Joined: 09-10-2012
Location: Little Chute, Wisconsin USA
Posts: 435
Status: 
Offline
Hey guys.  I wasn't quite sure where to post this.  Not really a JH specific question, more of a "dealing with an old car with old electrics" question.

Like most of us, I have a somewhat leaky Lotus 907 under the hood and before I tackle the exhaust header replacement, I thought it would be a good idea to try to clean things up under there.  The entire bottom half of the engine looks like it's never been cleaned... a pretty good layer of built up grease/oil/dirt/whatever.

I am not planning on pulling the engine at this time, so I guess I'm curious... what can I do to reduce the chances of causing myself more trouble than I want to while cleaning the engine?  My plan was to remove the battery, alternator, coil, and plug wires, and then remove the air filter (I have the stock "muffler" air filter with Strombergs) and cover the opening on the airbox, along with wrapping up the distributor with a plastic bag and tie.  Then, shoot the whole thing with degreaser, rinse with low pressure, repeat as necessary.

Am I missing anything?

Back To Top PM Quote Reply  

 Posted: 03-17-2015 12:52 am
  PM Quote Reply
2nd Post
Jim Sohl sn 11210
Member
 

Joined: 01-20-2015
Location:  
Posts: 9
Status: 
Offline
Blow dry.  Leaf blowers work great

Back To Top PM Quote Reply

Current time is 05:06 am  
> Jensen Healey & Jensen GT Tech > Miscellaneous > Cleaning/degreasing the engine in place Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems