| ||||
| ||||
| Moderated by: Greg Fletcher | Page: 1 2   |
|
|||||||||||||
| New member from Ontario | Rating: 
|
| Author | Post |
|---|
| Posted: 12-01-2011 01:58 pm |
|
1st Post |
|
Scottm5407 Member
|
Hi everybody I just acquired my first JH ( 1973 MK1). In fact, this is my first British sports car. It is the basket case from Bradford Ontario that Stephen Szikora mentioned in his message of 10/11. I was looking for a winter project that would ultimately lead to something that no one else in the local car clubs has.(I am located in Eastern Ontario, near Cornwall ) My other car ( not counting daily drivers) is a '77 Chrysler New Yorker Brougham 2-door coupe, so as you can see, I'm going pretty much from one extreme to the other.( 5 feet shorter, 3000lbs lighter, and 70% of the horsepower) As Stephen mentioned, it looks like the restoration process on this car began in 1982, and was never completed. If I understand the paper trail correctly, it changed hands at least 3 times since. Anyway, its current state is : Framework, brakes, suspension, engine & transmission (supposedly) redone & installed. Rear fenders , trunklid and both doors installed. Came with both a fiberglass and a metal hood ( not installed ), ditto for front fenders. Both metal bumpers are present as well. Interior is completely gutted, although I seem to have 2 of most things needed to rebuild it. A few NOS parts, but it looks like mostly parts salvaged from a few donor cars. I'm still trying to identify what some of these parts are, and if they even belong to this car. ( I suspect that the golf-club covers and Weed-Whacker parts that I found in one of the many boxes of parts were optional accessories.... but I digress) Found the Delta website and a couple of copies of their old catalog, which has helped. Otherwise, it is sort of like a jigsaw puzzle with some duplicated and some missing peices, and no picture. So I guess my first question ( of I'm sure many more to come) is: Is there a publication available that shows how this car goes together ? Thanks ! Scott Mackay
|
||||||||||||||
| |||||||||||||||
| Posted: 12-01-2011 02:32 pm |
|
2nd Post |
|
Lash Russell Member 
|
Hi Scott, Welcome to the Jensen craziness, you're gonna love it I'd say the first thing you need is the JH Shop manual. I've seen these on Ebay and maybe Delta has one as well, call Jim there and he could probably set you up. The JHPS has JH service bullitins for sale as well, these are pretty helpful but I'd start with the shop manual. Good luck, Lash
|
|||||||||||||
| ||||||||||||||
| Posted: 12-01-2011 04:44 pm |
|
3rd Post |
|
Scottm5407 Member
|
Thanks Lash......I will look into that Scott
|
||||||||||||||
| |||||||||||||||
| Posted: 12-02-2011 07:04 am |
|
4th Post |
|
Tim Murphy Member 
|
I think the parts catalogue would be the best to see how everything fits together. It has exploded views of every section of the car.
|
|||||||||||||
| ||||||||||||||
| Posted: 12-02-2011 01:39 pm |
|
5th Post |
|
Scottm5407 Member
|
Lash... It turns out I already have the shop manual, however it seems to have very little information on the body and interior, which are the 2 areas I'm trying to sort out. Hi Tim Thanks for the suggestion. I had a talk with Jeff at Delta yesterday, and we talked about the parts catalog as a possible source of enlightenment. He was even kind enough to fax me a couple of pages as examples. I have a couple of old copies of the printed Delta catalog, and what is in there and in various places on the current Delta website are basically copies of most of the exploded drawings in the parts catalog. So it seems that I already have access to much of this information ( and you're right, these have put me light years ahead of where I was ) What these views don't show however is how the various sectons fit together, and Jeff told me that there is really no publication that shows this. My problem lies in the fact that I wasn't the one who took it apart in the first place. So I guess I'm going to have to tackle these issues one at a time and hope that some good-hearted member(s) will have been up the street that I'm trying to navigate at any given stage, and will be kind enough to point me in the right direction. At this point I am trying to get a handle on the dash and instrument cluster. The dash is pretty straightforward. The instrument cluster has been redone and is ready to install, but I have no idea how the instrument cluster attaches to whatever it attaches to. It seems to be a sloppy fit into the oval opening in the dash, but either or both of these parts may not have come from this car, ( or even the same car as each other) I have another complete unrestored instrument cluster, which I stripped down to just the bare plastic bezel, and this seems to fit a little better into the dash opening. In both cases the finisher strip on the instrument cluster in missing...is this essential in putting it all together, or is it just cosmetic ? Should the cluster be assembled to the dash first and then the whole thing installed in the car, or does the dash go in first and the cluster after ?? Sorry if these sound like really dumb questions, but this is the first section of the car I've tried to sort out, and I'm already stumped. Scott
|
||||||||||||||
| |||||||||||||||
| Posted: 12-02-2011 02:10 pm |
|
6th Post |
|
Brett Gibson JH5 20497 Member
|
Welcome aboard Scott, as for pictures of what goes were the parts cat. is a good source or visit web sites members have put up with a "how to do". For the dash your best approach is to install the main dash and then the instrument pod, the pod is only held in by a center ron that slides into a whole in the main dash (put a little oil or grease on the rod makes it easier) then there are two small screws in the upper corners of the pod that hold it, as for the trim piece that goes around the pod that is strickly just for looks and takes up a bit of the gap, some people paint them differant colors to match the car and such. Brett
|
|||||||||||||
| ||||||||||||||
| Posted: 12-02-2011 05:10 pm |
|
7th Post |
|
Scottm5407 Member
|
Hi Brett You have solved the mystery.......thanks !! What threw me here was that on one of the cluster assemblies ( the rebuilt one), there were 3 jagged looking holes, (one above the outboard guage on the left and 2 on the right) , that looked like someone had made them after several attempts with a dull icepick, while the unrestored one has no screw holes anywhere. I suspect that moving forward I'm going to find lots more of this kind of stuff. Thanks to all for your help, and stay tuned for my next set of dumb-sounding questions ! Scott
|
||||||||||||||
| |||||||||||||||
| Posted: 12-04-2011 04:54 am |
|
8th Post |
|
Frank Schwartz Member
|
Hmmm...looks like you go tyour work cut out for you...I strongly suggest that you find a copy of the Jensen Healey parts book. Every part is shown and part numbers referenced as well. This will go a long way in helping you put things back together. You really need this book...hard to work on the car without it. As for the instrument cluster, it has a 3/8 or so post stciking out the back that goes into a spring clip sort of gadget on the dash, to hold it in place. use a bit of vaseline or white grease on it when installing it as it usually rusts and is hell to get out when it does. There are two mounting holes, at about 2 oclock on the right side instrument cluster housing that uses a long thin screw that goes into a plate fixed to the inside of the dash...same on the left side at about 10 oclock up inside the left side instrument mount. As for the finishing cord...not available. My daughter, a Jensenite can sew up one for you with some serious groveling, as she did for me...and I glue it on with some special (readialy available) glue...the original was attached with ten thousand staples...and with age it cracked and came apart... She makes enough to do the clusster and on the bottom of the dash, too, if yours has it.
|
|||||||||||||
| ||||||||||||||
| Posted: 12-04-2011 04:16 pm |
|
9th Post |
| Posted: 12-04-2011 05:06 pm |
|
10th Post |
|
Frank Schwartz Member
|
Yes...that will work...seems all the substitute trim will have a textured cord in it...however, it looks good...and that is what my daughter uses to make the trim she can be coerced into making. I glue it on, rather than try to find staples like the factory used. I forget the name of the glue, but it is really good...sticks to everything and never lets go. If you wish, ask on this link, and I will go out to my workshop and get youthe name of the glue. Frank
|
|||||||||||||
| ||||||||||||||
| Posted: 12-04-2011 05:12 pm |
|
11th Post |
|
JodyKerr Member 
|
The stuff I use is called "Seal All" comes in a yellow tube. Should be available most anywhere, works really well.
|
||||||||||||||
| |||||||||||||||
| Posted: 12-04-2011 05:53 pm |
|
12th Post |
|
Frank Schwartz Member
|
That's it, Jody !!! You saved me a trip downstairs to the garage shop! Use rubber gloves as it is hard to get off your hands...but it is perfect for this job. Frank
|
|||||||||||||
| ||||||||||||||
| Posted: 12-04-2011 08:11 pm |
|
13th Post |
|
Mason Jones Member 
|
The piping came with a bunch of little screws but that seemed like an odd way to attach it. I'll try the glue.
|
||||||||||||||
| |||||||||||||||
| Posted: 12-05-2011 02:05 pm |
|
14th Post |
|
Scottm5407 Member
|
Hi everybody A pleasure to meet you all and thanks for your help ! Delta has the parts book, and I will be ordering one soon. Good to know that there is a supplier in Ontario that I can get in touch with ( getting things across the border from the US can be a pain sometimes) One more seemingly dumb sounding question on the instrument cluster if I may... On both of the assemblies that I have, there is a pilot light with a blue lense at around the 2 o'clock position in front of the oil pressure guage . Why is it there ?? Thanks again! Scott
|
|||||||||||||
| ||||||||||||||
| Posted: 12-05-2011 02:33 pm |
|
15th Post |
|
NickJ Member
|
Hi Scott, I'm one of the new guys too. This board has been super helpful for me, most of the time I dont even have to ask a question because it has already been asked. I am also curious about the oil pressure light, mine is green though. I assume if it is on....that is a good thing?
|
||||||||||||||
| |||||||||||||||
| Posted: 12-05-2011 04:49 pm |
|
16th Post |
|
JodyKerr Member
|
High Beams iirc
|
|||||||||||||
| ||||||||||||||
| Posted: 12-05-2011 05:02 pm |
|
17th Post |
|
NickJ Member
|
JodyKerr wrote:High Beams iirc The high beams is the center light between the signal indicators. This is the one that sits at an angle above the Oil Pressure gauge.
|
||||||||||||||
| |||||||||||||||
| Posted: 12-05-2011 05:19 pm |
|
18th Post |
|
Frank Schwartz Member
|
I think you fellows are confused. The two green lamps in the gauge cluster are for right and left turn signals. The blue one in the center is the high beam light. The little green one in the oil pressure light portion is so you can see the meter at night. All of the gauges are under lighted (is there such a word?) and mostly impossible to see at night. You can buy some bulbs from Delta that really are bright and replace the bulbe in the insturments and actually be able to see them at night. Really! The ones in there are useless at night. Trust me on that...also you shouild bypass the brightness unit that usually does not work anyway. Keep the instruments on bright..even with the new bulbs suggested, that is if you want to be able to see them at night. There is a bulb in the console lighting that is red when the engine is not running and goes out when the engine starts. It is not an oil pressure indicator, but is wired into the alternator circuit. Engine not running>light on. Engine running>light off. And that green light that shines on the oil gauge is even hard to see at night...if you can find a red one from an MG in a junk yard, use it...the red shining on the oil pressure gauge is much easier to see than the green one....
|
|||||||||||||
| ||||||||||||||
| Posted: 12-05-2011 05:37 pm |
|
19th Post |
|
NickJ Member
|
So what you are saying Frank, is the most simple explanation for the OP light is the correct one? No way, we are talking about Lucas electrics after all. :) Thanks for the tips on the lighting, yeah the rheostat doesnt work in mine either.
|
||||||||||||||
| |||||||||||||||
| Posted: 12-05-2011 05:48 pm |
|
20th Post |
|
Scottm5407 Member
|
Well, that clears up my second dumb question......thanks all ! Nick, you were correct...green, not blue. ( My car is in another building and I was relying on memory.....which apparently isn't as reliable as it once was.) Don't know if any of my stuff actually works or not, as it is in pieces on my workbench at the moment. BTW, I saw the px of your car .....looks great ! Hope mine will look half as good when I'm finished. Scott
|
|||||||||||||
| ||||||||||||||
| Current time is 06:33 pm | Page: 1 2 |
| > Jensen Healey & Jensen GT Tech > Miscellaneous > New member from Ontario | Top |
